Datasheet Texas Instruments REF1004I-2.5

ManufacturerTexas Instruments
SeriesREF1004-2.5
Part NumberREF1004I-2.5
Datasheet Texas Instruments REF1004I-2.5

Micropower Voltage Reference 8-SOIC -40 to 85

Datasheets

Micropower Voltage Reference datasheet
PDF, 248 Kb, File published: Sep 27, 2000
Extract from the document

Prices

Status

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityYes

Packaging

Pin88
Package TypeDD
Industry STD TermSOICSOIC
JEDEC CodeR-PDSO-GR-PDSO-G
Package QTY7575
CarrierTUBETUBE
Device MarkingREF0425
Width (mm)3.913.91
Length (mm)4.94.9
Thickness (mm)1.581.58
Pitch (mm)1.271.27
Max Height (mm)1.751.75
Mechanical DataDownloadDownload

Parametrics

Initial Accuracy(Max)0.8 %
Iout/Iz(Max)20 mA
Min Iz for Regulation12 uA
Operating Temperature Range-40 to 85,0 to 70 C
Package GroupSOIC
Package Size: mm2:W x L8SOIC: 29 mm2: 6 x 4.9(SOIC) PKG
Pin/Package8SOIC
RatingCatalog
Reference VoltageFixed
Temp Coeff(Typ)20 ppm/ degree C
VO2.5 V
VO Adj(Max)2.5 V
VO Adj(Min)2.5 V
WBN 10-10 kHz(Typ)120 uVrms

Eco Plan

RoHSCompliant

Application Notes

  • How to get 23 bits of effective resolution from your 24-bit converter
    PDF, 96 Kb, File published: Sep 27, 2000
    The ADS1210 and ADS1211 are precision, wide dynamic range, delta-sigma A/D converters that have 24 bits of no missing code and up to 23 bits rms of effective resolution. Because of the nature of the delta-sigma design architecture the circuit designer has control over more of the variables and interface options in the A/D's conversion process than is realizable with other converter architectures.
  • Comparing the ADS1201 to the CS5321 [745k]
    PDF, 212 Kb, File published: Sep 27, 2000
    The intent of this application bulletin is to provide a simple means of comparing the operation of the ADS1201 delta-sigma modulator to Crystal's CS5321 delta-sigma modulator. It is not the intent of this document to descibe the theory or the operation behind delta-sigma modulators, it is merely to provide the methodology, configuration, and results of tests that were performed using these modulat
  • Remove the DC Portion of Signals with the ADS7817
    PDF, 55 Kb, File published: Sep 27, 2000
    Unwanted portions of a signal, such as a DC pedestal, can be difficult to reject in a single supply circuit. A DC pedestal voltage most typically appears at the output of an operational amplifier with a small signal riding on top of it. This pedestal voltage is required in the analog domain to insure that the small signal that contains the pertinent information never falls below the ground potenti

Model Line

Manufacturer's Classification

  • Semiconductors > Power Management > Voltage Reference > Shunt Voltage Reference

Other Names:

REF1004I2.5, REF1004I 2.5