Datasheet Analog Devices ADUM5200

FUNCTIONAL BLOCK DIAGRAMS
VDD1 1 OSC VISO 15 GNDISO 14 VIA/VOA VIB/VOB 4 13 VIB/VOB RCIN 5 12 NC 11 VSEL GND1 2
VIA/VOA 3 RCSEL 6 ADuM5200/
ADuM5201/
ADuM5202 VE1/NC 7
GND1 8 VE2/NC 9 GNDISO Figure 1. VIB RS-232/RS-422/RS-485 transceivers
Industrial field bus isolation
Power supply start-up bias and gate drives
Isolated sensor interfaces
Industrial PLCs 3 14 ADuM5200
4 13 VOA VOB Figure 2. ADuM5200 VIA GENERAL DESCRIPTION
VOB The ADuM5200/ADuM5201/ADuM52021 are dual-channel digital
isolators with isoPower®, an integrated, isolated dc-to-dc converter.
Based on the Analog Devices, Inc., iCoupler® technology, the
dc-to-dc converter provides up to 500 mW of regulated, isolated
power at either 5.0 V or 3.3 V from a 5.0 V input supply, or 3.3 V
from a 3.3 V supply at the power levels shown in Table 1. These
devices eliminate the need for a separate, isolated dc-to-dc converter
in low power isolated designs. The iCoupler chip scale transformer
technology is used to isolate the logic signals and for the magnetic
components of the dc-to-dc converter. The result is a small form
factor, total isolation solution. 1 10 07540-001 2-CHANNEL iCOUPLER CORE VIA isoPower uses high frequency switching elements to transfer power
through its transformer. Special care must be taken during printed …

Dual-Channel, 2.5 kV Isolators with
Integrated DC-to-DC Converter
ADuM5200W/ADuM5201W/ADuM5202W Automotive Products FUNCTIONAL BLOCK DIAGRAMS
VDD1 1 OSC REG RECT 16 VISO 15 GNDISO 14 VIA/VOA VIB/VOB 4 13 VIB/VOB RCIN 5 12 NC 11 VSEL 10 VE2/NC 9 GNDISO GND1 2
VIA/VOA 3
2-CHANNEL iCOUPLER CORE RCSEL 6 ADuM5200W/
ADuM5201W/
ADuM5202W VE1/NC 7
GND1 8 10436-001 Qualified for automotive applications
isoPower integrated, isolated dc-to-dc converter
Regulated 3.3 V or 5 V output
Up to 400 mW output power
Dual, dc-to-25 Mbps (NRZ) signal isolation channels
16-lead SOIC package with 7.6 mm creepage
High temperature operation: 105°C maximum
High common-mode transient immunity: >25 kV/µs
Safety and regulatory approvals
UL recognition
2500 V rms for 1 minute per UL 1577
CSA Component Acceptance Notice #5A)
VDE certificate of conformity
IEC 60747-5-2 (VDE 0884, Part 2):2003-01
VIORM = 560 VPEAK Figure 1. VIA APPLICATIONS VIB Industrial field bus isolation …