Datasheet Analog Devices LTC4360ISC8-2#TRMPBF

LTC4360-1/LTC4360-2
Overvoltage Protection Controller
FEATURES DESCRIPTION 2.5V to 5.5V Operation
nn Overvoltage Protection Up to 80V
nn No Input Capacitor or TVS Required for Most
Applications
nn 2% Accurate 5.8V Overvoltage Threshold
nn VGATE(TH) to PWRGD Low tON(OFF) ON High to GATE Off VON = Step 0V to 2.5V (LTC4360-1) l Input Pins Output Pins
2 3.2 MΩ 0.23 0.4 V 250 500 800 kΩ 50 130 200 ms l 0.25 1 µs l
l 0.25
65 1
100 µs
ms 2 5 µs Delay Note 1: Stresses beyond those listed under Absolute Maximum Ratings
may cause permanent damage to the device. Exposure to any Absolute
Maximum Rating condition for extended periods may affect device
reliability and lifetime.
Note 2: All currents into device pins are positive; all currents out of device
pins are negative. All voltages are referenced to GND unless otherwise
specified. 25 Note 3: An internal clamp limits VGATE to a minimum of 4.5V above VOUT.
Driving this pin to voltages beyond this clamp may damage the device. Rev B For more information www.analog.com 3 LTC4360-1/LTC4360-2
TYPICAL PERFORMANCE CHARACTERISTICS
TA = 25°C, VIN = 5V, VON = 0V (LTC4360-1) unless otherwise noted.
Input Supply Current …