Datasheet Texas Instruments TUSB6250PFC
| Manufacturer | Texas Instruments |
| Series | TUSB6250 |
| Part Number | TUSB6250PFC |
USB 2.0 Low-Power, High-Speed ATA/ATAPI Bridge Solution 80-TQFP 0 to 70
Datasheets
TUSB6250 USB 2.0 to ATA/ATAPI Bridge Controller datasheet
PDF, 542 Kb, Revision: E, File published: Apr 4, 2008
Extract from the document
Prices
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No |
Packaging
| Pin | 80 | 80 |
| Package Type | PFC | PFC |
| Industry STD Term | TQFP | TQFP |
| JEDEC Code | S-PQFP-G | S-PQFP-G |
| Package QTY | 96 | 96 |
| Carrier | JEDEC TRAY (10+1) | JEDEC TRAY (10+1) |
| Device Marking | TUSB6250PFC | *R |
| Width (mm) | 12 | 12 |
| Length (mm) | 12 | 12 |
| Thickness (mm) | 1 | 1 |
| Pitch (mm) | .5 | .5 |
| Max Height (mm) | 1.2 | 1.2 |
| Mechanical Data | Download | Download |
Parametrics
| Operating Temperature Range | 0 to 70 C |
| Package Group | TQFP |
| Package Size: mm2:W x L | 80TQFP: 196 mm2: 14 x 14(TQFP) PKG |
| Rating | Catalog |
| USB Speed | 480 Mbps |
Eco Plan
| RoHS | Compliant |
Application Notes
- TUSB6250 Power Supply SequencingPDF, 39 Kb, File published: Feb 24, 2005
Power Supply Sequencing - TUSB6250 Bootcode Application NotePDF, 573 Kb, File published: Jan 7, 2004
The TUSB6250 bootcode is a start-up code stored as a ROM image within the TUS6250 device. An embedded microcontroller starts executing this code after power-on reset. Once the code is running, it loads application firmware from either an external memory device or the USB host controller. After the code has finished downloading, the bootcode releases its control to the application firmware.This - TUSB6250 FAQ (Rev. A)PDF, 695 Kb, Revision: A, File published: Jan 28, 2005
This document is a compilation of frequently asked questions regarding the TUSB6250 USB 2.0 to ATA/ATAPI Bridge Controller. - Selection and Specification of Crystals for Texas Instruments USB 2.0 DevicesPDF, 61 Kb, File published: Dec 12, 2002
- Using the TUSBxxxx EEPROM Programmer (Rev. B)PDF, 264 Kb, Revision: B, File published: Jun 9, 2011
- VIDs, PIDs, and Firmware: Design Decisions When Using TI USB Device ControllersPDF, 162 Kb, File published: Sep 24, 2003
System designers using TI USB controller devices must make certain design decisions involving the vendor ID (VID) and product ID (PID) of the USB device and the location of firmware. If these are not configured properly, the device will not be enumerated correctly by the USB host.This document discusses how these are handled within a system using one of the TI USB device controllers. These con
Model Line
Series: TUSB6250 (3)
- TUSB6250PFC TUSB6250PFCG4 TUSB6250PFCR
Manufacturer's Classification
- Semiconductors > Interface > USB > USB Controllers and Transceivers
