PDF, 735 Kb, Language: en, File published: May, 2015, Pages: 24
Bi-CD Integrated Circuit Silicon Monolithic
Extract from the document
TB67S158NG
TOSHIBA Bi-CD Integrated Circuit Silicon Monolithic TB67S158NG
1. Summary/Features/Appearance
Constant voltage control DMOS driver incorporating 2 function modes (full parallel input and
serial input).
Summary The TB67S158 is a constant voltage control DMOS driver. It can operate
maximum of two unipolar stepping motors (max).
MODE1: Full parallel input (similar to transistor array)
MODE2: Serial input NG Output voltage of 80V and maximum current of 1.5A are realized by
applying BiCD process. Motor can be driven by single power supply of
VM with the internal regulator. P-SDIP24-0723-1.78-001 Weight: 1.4g(typ.) Features
・Capable of operating maximum of two 2-phase unipolar stepping motors by one chip.
・High voltage and current (as for specifications, please refer to the absolute maximum ratings and operation
ranges).
・Low on resistance (Ron=0.5Ω (typ.) of output step is realized by BiCD process.
・Built-in VCC regulator for internal circuit control (capable of operating by only VM power supply)
・Capable of constant voltage driving (corresponding to 2-phase and 1-2-phase excitation drives)
・Built-in thermal shutdown circuit (TSD), over current detection (ISD), and power on reset of VM power
supply.
・ALERT signal can be outputted to outside when thermal shutdown circuit (TSD) or over current detection
(ISD) operates. Note) Please be careful about the thermal conditions during use. ©2014 Toshiba Corporation 1 2015-5-11 TB67S158NG
2. Block diagram: MODE1 (Full parallel mode) IN_A1
IN_A2 IN_B1 …
