Datasheet Cypress CCG6SF

Datasheets

Prices

Detailed Description

EZ-PD CCG6DF and EZ-PD CCG6SF are Cypress’ dual-port and single-port USB-C™ and Power Delivery controllers targeting PCs and Notebooks.

CCG6DF/CCG6SF integrates a VBUS provider path load switch controller along with USB authentication support, VBUS-to-CC short protection, VBUS-to-SBU short protection, 20V-VBUS regulator, high-voltage NFET gate drivers for VBUS Consumer path, SBU pass-through and USB HS mux.

CCG6DF/CCG6SF supports Dual Role Port (DRP) and will fully support the Power Delivery 3.0 specification. CCG6DF/CCG6SF is a programmable solution with 64KB flash and 96-KB ROM supporting fail-safe boot up and firmware upgrade.

Product Features

• USB Type-C and Power Delivery 3.0 supporting USB3 and USB4, Thunderbolt, DisplayPort Alternate Mode platforms
• Integrated Digital Blocks
  • Two timers, counters, PWMs, and up to 23 GPIOs
  • Four SCBs for configurable master/slave I2C, SPI or UART
• Integrated Analog Blocks
  • VBUS Provider Load switch (5V/3A)
  • Slew rate controlled turn-on on VBUS path
  • UAB PD 3.0 Fast Role Swap support
  • Integrated high-voltage 20V-regulator
  • SBU Pass through, USB analog mux
  • VBUS-to-CC short protection
  • VBUS-to-SBU short protection
  • VCONN FETs
  • High-side current sense amplifier across 5 mohms
  • High-voltage NFET gate drivers for VBUS consumer path
  • VBUS discharge NFET
• System-Level Fault Protection
  • Over-current, Over-voltage, Under-volatge, Reverse-current and Short-circuit protection on VBUS provider path
  • VCONN over-current protection
  • Thermal Shutdown
• Packages: CCG6DF: 96-BGA (6x6 mm) and CCG6SF: 48-QFN (6x6 mm)

Other Options

CCG6DF

Model Line

Manufacturer's Classification

• USB Controllers > USB-C and Power Delivery