Datasheet Analog Devices HMC518-DIE

HMC518
v02.0217 LOW NOISE AMPLIFIERS -CHIP GaAs pHEMT MMIC LOW NOISE
AMPLIFIER, 20 -32 GHz
Typical Applications Features The HMC518 is ideal for use as a LNA or driver amplifier for: Noise Figure: 3 dB • Point-to-Point Radios OIP3: 23 dBm • Point-to-Multi-Point Radios & VSAT Single Supply: +3V @ 65 mA • Test Equipment and Sensors 50 Ohm Matched Input/Output • Military & Space Die Size: 2.27 x 1.32 x 0.1 mm Functional Diagram General Description Gain: 15 dB The HMC518 chip is a high dynamic range GaAs
PHEMT MMIC Low Noise Amplifier (LNA) which
covers the 20 to 32 GHz frequency range. The
HMC518 provides 15 dB of small signal gain, 3 dB
of noise figure and has an output IP3 greater than
23 dBm. The chip can easily be integrated into hybrid or MCM assemblies due to its small size. All data
is tested with the chip in a 50 Ohm test fixture connected via 0.075mm (3 mil) ribbon bonds of minimal
length 0.31 mm (12 mil). Two 0.025 mm (1 mil) diameter
bondwires may also be used to make the RFIN and
RFOUT connections. Electrical Specifications, TA = +25° C, Vdd 1, 2, 3 = +3V
Parameter Min. Frequency Range
Gain Typ. 12 Gain Variation Over Temperature
Noise Figure Min. Typ. Max. 28 -32 15 10 Units
GHz 13 dB 0.015 0.025 0.015 0.025 dB/ °C 3.0 4.0 3.5 5.5 dB Input Return Loss 13 10 Output Return Loss 15 10 dB 12 dBm 16 dBm Output Power for 1 dB Compression (P1dB) 9 Saturated Output Power (Psat) 1 Max. 20 -28 12
14 Output Third Order Intercept (IP3) 23 Supply Current (Idd)(Vdd = +3V) 65 Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners. 9 dB 25
88 65 dBm …