Datasheet Dialog Semiconductor SLG46811

SLG46811
Preliminary GreenPAK Programmable Mixed-Signal Matrix General Description
The SLG46811 provides a small, low power component for commonly used Mixed-Signal functions. The user creates their
circuit design by programming the one time programmable (OTP) Non-Volatile Memory (NVM) to configure the interconnect
logic, the IO Pins, and the macrocells of the SLG46811. This highly versatile device allows a wide variety of Mixed-Signal
functions to be designed within a very small, low power single integrated circuit. Key Features Multichannel Sampling Analog Comparator (MS ACMP) Sampling up to Four Analog Channels Selectable Voltage Reference for Each Channel Different Sampling Scenarios Synchronous or Asynchronous Result Appearance
Integrated Voltage References (Vref)
Twelve Combination Function Macrocells Two 2-Bit LUT or DFF/LATCH Macrocells One Selectable Programmable Pattern Generator or 2bit LUT Four 3-Bit LUT or DFF/LATCH with Set/Reset Four Selectable DFF/LATCH or 3-bit LUTs or Shift
Registers One 4-Bit LUT or DFF/LATCH with Set/Reset Macrocell
Six Multi-Function Macrocells Five Selectable DFF/LATCH or 3-bit LUTs + 8-bit
Delay/Counters One Selectable DFF/LATCH or 3-bit LUTs + 8-bit
Delay/Counter/FSM
Extended Pattern Generator Up to 8 Parallel Outputs 92 bytes Pattern Stored in the NVM
Serial Communications
2 I C Protocol Interface
Programmable Delay with Edge Detector Output
Deglitch Filter or Edge Detector Two Oscillators (OSC) Selectable 2.048 kHz or 10 kHz Oscillator 25 MHz Oscillator
Analog Temperature Sensor
Power-On Reset (POR) with CRC
Read Back Protection (Read Lock)
Power Supply 2.3 V ≤ VDD ≤ 5.5 V
Operating Temperature Range: -40 °C to 85 °C
RoHS Compliant/Halogen-Free …