Datasheet Maxim MAX6511UT095

19-1819; Rev 2; 10/04 Low-Cost, Remote SOT Temperature Switches The MAX6511/MAX6512/MAX6513 are fully integrated,
remote temperature switches that use an external P-N
junction (typically a diode-connected transistor) as the
sensing element to measure the remote temperature.
These devices assert a logic signal when the temperature crosses a factory-programmed threshold. Available
trip thresholds are from +45°C to +125°C in 10°C increments. Accuracy is within ±3°C (TA = -5°C to +55°C) or
±5°C (TA = -40°C to +85°C). Hysteresis is pin selectable to 5°C or 10°C.
The MAX6511 has an active-low CMOS output and the
MAX6513 has an active-high CMOS output. The
MAX6512 has an open-drain output. The output is
asserted when the temperature exceeds the threshold
value. The active-low open-drain output is intended to
interface with a microprocessor (µP) reset or interrupt
input. The active-high CMOS output can directly drive a
power FET to control a cooling fan.
The MAX6511/MAX6512/MAX6513 operate from a
+3.0V to +5.5V supply and typically consume 400µA of
supply current. They are available in the small 6-pin
SOT23. The MAX6513 is also available in a 6-pin leadfree TDFN package. Features
♦ Continuously Measure External Junction
Temperature
♦ Factory-Programmed Temperature Threshold from
+45°C to +125°C in 10°C Increments …