Datasheet Analog Devices AD8041ARZ

REVISIONS
LTR DATE (YR-MO-DA) APPROVED A Drawing updated to reflect current requirements. -ro DESCRIPTION 02-04-18 R. MONNIN B Make a change to footnote 1/ under Table I. Make changes to +VOUT test
under Table I. Add new footnote 2/ to the –VOUT test under Table I. -ro 06-12-08 R. MONNIN 09-12-09 C. SAFFLE 10-02-22 C. SAFFLE Add device type 02 and RHA designator “R” requirements.
Add case outline H. Add paragraphs 1.4.1, 1.5, 3.2.3, 4.4.4.1, and Table IIB.
Make changes to 1.2, 1.2.2, 1.3, Table I, and figure 1.
Add a footnote 4/ to the IS test as specified under Table I.
Make changes to CMRR, PSRR tests, footnote 1/ for device type 01 as
specified under Table I. -ro
In Table I, add the word “mode” after Disabled in the conditions column for
IS test. In Table I, add “” to VOS, IIB, and IOS max limits column. In Table I,
under footnote 4/, add the words “Disabled mode” at beginning of note.
Delete the burn in and group c end point limits from Table IIB. -ro C D E Add device type 03 tested at low dose rate. Make changes to paragraphs
1.2.2, 1.5, 4.4.4.1 and Table I. -ro 11-09-08 C. SAFFLE F Update document paragraphs to current MIL-PRF-38535 requirements. -ro 17-07-06 C. SAFFLE REV
SHEET
REV
SHEET
REV STATUS REV F F F F F F F F F F F F OF SHEETS SHEET 1 2 3 4 5 6 7 8 9 10 11 12 PMIC N/A PREPARED BY
RICK OFFICER STANDARD
MICROCIRCUIT
DRAWING DLA LAND AND MARITIME
COLUMBUS, OHIO 43218-3990
http://www.landandmaritime.dla.mil CHECKED BY
RAJESH PITHADIA …

160 MHz Rail-to-Rail
Amplifier with Disable
AD8041
FEATURES
Fully Specified for +3 V, +5 V, and ⴞ5 V Supplies
Output Swings Rail to Rail
Input Voltage Range Extends 200 mV Below Ground
No Phase Reversal with Inputs 1 V Beyond Supplies
Disable/Power-Down Capability
Low Power of 5.2 mA (26 mW on 5 V)
High Speed and Fast Settling on 5 V:
160 MHz –3 dB Bandwidth (G = +1)
160 V/␮s Slew Rate
30 ns Settling Time to 0.1%
Good Video Specifications (RL = 150 ⍀, G = +2)
Gain Flatness of 0.1 dB to 30 MHz
0.03% Differential Gain Error
0.03ⴗ Differential Phase Error
Low Distortion
–69 dBc Worst Harmonic @ 10 MHz
Outstanding Load Drive Capability
Drives 50 mA 0.5 V from Supply Rails
Cap Load Drive of 45 pF …

160 MHz Rail-to-Rail
Amplifier with Disable
AD8041
FEATURES
Fully Specified for +3 V, +5 V, and ⴞ5 V Supplies
Output Swings Rail to Rail
Input Voltage Range Extends 200 mV Below Ground
No Phase Reversal with Inputs 1 V Beyond Supplies
Disable/Power-Down Capability
Low Power of 5.2 mA (26 mW on 5 V)
High Speed and Fast Settling on 5 V:
160 MHz –3 dB Bandwidth (G = +1)
160 V/␮s Slew Rate
30 ns Settling Time to 0.1%
Good Video Specifications (RL = 150 ⍀, G = +2)
Gain Flatness of 0.1 dB to 30 MHz
0.03% Differential Gain Error
0.03ⴗ Differential Phase Error
Low Distortion
–69 dBc Worst Harmonic @ 10 MHz
Outstanding Load Drive Capability
Drives 50 mA 0.5 V from Supply Rails
Cap Load Drive of 45 pF …