Datasheet Texas Instruments THS3121CD

Single, Low Noise, High Output Drive, 475mA Current-Feedback Amplifier 8-SOIC -40 to 85

Datasheets

PDF, 1.3 Mb, Revision: E, File published: Oct 12, 2009

Extract from the document

Lifecycle Status	Active (Recommended for new designs)
Manufacture's Sample Availability	No

2nd Harmonic	51 dBc
3rd Harmonic	50 dBc
@ MHz	10
Acl, min spec gain	1 V/V
Additional Features	N/A
Architecture	Bipolar,Current FB
BW @ Acl	130 MHz
CMRR(Min)	63 dB
CMRR(Typ)	70 dB
GBW(Typ)	130 MHz
Input Bias Current(Max)	4000000 pA
Iq per channel(Max)	4.25 mA
Iq per channel(Typ)	3.5 mA
Number of Channels	1
Offset Drift(Typ)	10 uV/C
Operating Temperature Range	-40 to 85 C
Output Current(Typ)	475 mA
Package Group	SOIC
Package Size: mm2:W x L	8SOIC: 29 mm2: 6 x 4.9(SOIC) PKG
Rail-to-Rail	No
Rating	Catalog
Slew Rate(Typ)	1500 V/us
Total Supply Voltage(Max)	30 +5V=5, +/-5V=10
Total Supply Voltage(Min)	10 +5V=5, +/-5V=10
Vn at 1kHz(Typ)	2.5 nV/rtHz
Vn at Flatband(Typ)	2.5 nV/rtHz
Vos (Offset Voltage @ 25C)(Max)	10 mV

RoHS

Compliant

Evaluation Modules & Boards: THS3111EVM
THS3111 Evaluation Module
Lifecycle Status: Active (Recommended for new designs)
- Download
Evaluation Modules & Boards: THS3120EVM
THS3120 Evaluation Module
Lifecycle Status: Active (Recommended for new designs)
- Download
Evaluation Modules & Boards: THS3110EVM
THS3110 Evaluation Module
Lifecycle Status: Active (Recommended for new designs)
- Download

Download
Active filters using current-feedback amplifiers
PDF, 227 Kb, File published: Feb 25, 2005
Download
Expanding the usability of current-feedback amplifiers
PDF, 215 Kb, File published: Feb 28, 2005
Download
Wideband Complementary Current Output DAC Single-Ended Interface
PDF, 597 Kb, File published: Jun 21, 2005
High-speed digital-to-analog converters (DACs) most often use a transformer-coupled output stage. In applications where this configuration is not practical, a single op ampdifferential to single-ended stage has often been used. This application note steps through the exact design equations required to achieve gain matching from each output as well as a matched input impedance to each of the DA
Download
Noise Analysis for High Speed Op Amps (Rev. A)
PDF, 256 Kb, Revision: A, File published: Jan 17, 2005
As system bandwidths have increased an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not however particularly comfortable with the calculations required to predict the total noise for an op amp or in the conversions between the different descriptions of noise. Considerable inconsistency between manufactu

Series: THS3121 (6)

Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)