Datasheet ATBTLC1000-MR (Microchip)

link to page 2
ATBTLC1000-MR110CA ATBTLC1000-MR110CA Ultra-Low Power BLE Module Introduction
The ATBTLC1000-MR110CA is an ultra-low power Bluetooth® Low Energy (BLE) module with Integrated Transceiver, Modem, MAC, PA, TR Switch, and Power Management Unit (PMU). It can be used as a Bluetooth Low Energy link controller or data pump with external host MCU. The qualified Bluetooth SIG protocol stack is stored in dedicated ROM. The firmware includes L2CAP service layer protocols, Security Manager, Attribute protocol (ATT), Generic Attribute Profile (GATT), and the Generic Access Profile (GAP). Additionally, application profiles such as Proximity, Thermometer, Heart Rate, Blood pressure and many other SIG-defined profiles. The ATBTLC1000-MR110CA is a fully-certified module that contains the ATBTLC1000A-MU (QFN), ceramic high-gain chip antenna, 26 MHz crystal, and PMU circuit. The module needs an external 32 kHz clock or crystal to power-up. Microchip BluSDK offers a comprehensive set of tools including reference applications for several Bluetooth SIG defined profiles and a custom profile. The BluSDK helps the user to quickly evaluate, design and develop BLE products with ATBTLC1000-MR110CA. The ATBTLC1000-MR110CA module has passed the Bluetooth SIG certification for interoperability with the Bluetooth Low Energy 5.0 specification.
Features
• Complies with Bluetooth v5.0, FCC CFR47 Part 15, ARIB STD-T66, and TELEC • Bluetooth Certification: – Bluetooth SIG QDID: 117593 https://launchstudio.bluetooth.com/listings/search • 2.4 GHz Transceiver and Modem: – -95 dBm/-93 dBm programmable receiver sensitivity – -55 dBm to +3.5 dBm programmable Tx output power – Integrated T/R switch – Single wire antenna connection • Processor Features: – ARM® Cortex®M0 32-bit processor – Single Wire Debug (SWD) interface – Four-channel Direct Memory Access (DMA) controller – Brown-out Detector and Power-on Reset (POR) – Watchdog timer • Memory: – 128 KB embedded RAM(1) © 2019 Microchip Technology Inc.
Datasheet
DS70005393A-page 1 Document Outline Introduction Features Table of Contents 1. Ordering Information 2. Package Information 3. Block Diagram 4. Pinout Information 4.1. Pin Description 5. Device States 5.1. Description of Device States 5.2. Controlling the Device States 6. Host Microcontroller Interface 7. Clocking 7.1. 26 MHz Crystal Oscillator (XO) 7.2. 32.768 kHz RTC Crystal Oscillator (RTC XO) 7.2.1. General Information 7.2.2. RTC XO Design and Interface Specification 7.2.3. RTC Characterization with Gm Code Variation 7.2.4. RTC Characterization with Supply Variation and Temperature 7.3. 2 MHz and 26 MHz Integrated RC Oscillators 8. Electrical Characteristics 8.1. Absolute Maximum Ratings 8.2. Recommended Operating Conditions 8.3. Current Consumption in Device States 8.4. Receiver Performance 8.5. Transmitter Performance 9. ATBTLC1000-MR110CA Module Outline Drawing 10. ATBTLC1000-MR110CA Reference Schematic 10.1. Reference Schematics 11. Placement and Routing Guidelines 11.1. Power and Ground 11.2. Interferers 12. Reflow Profile Information 12.1. Storage Condition 12.1.1. Moisture Barrier Bag Before Opening 12.1.2. Moisture Barrier Bag Open 12.2. Stencil Design 12.3. Soldering and Reflow Condition 12.3.1. Reflow Oven 12.4. Baking Conditions 12.5. Module Assembly Considerations 13. Regulatory Approval 13.1. United States (FCC) 13.1.1. Labeling And User Information Requirements 13.1.2. RF Exposure 13.1.3. Helpful Websites 13.2. Canada (ISED) 13.2.1. Labeling and User Information Requirements 13.2.2. RF Exposure 13.2.3. Helpful Websites 13.3. Japan 13.3.1. Labeling and User Information Requirements 13.3.2. Helpful Websites 13.4. Other Regulatory Information 14. Reference Documentation 15. Document Revision History The Microchip Web Site Customer Change Notification Service Customer Support Microchip Devices Code Protection Feature Legal Notice Trademarks Quality Management System Certified by DNV Worldwide Sales and Service