USB Starter Kit Microchip DM330012
The dsPIC33E USB Starter Kit provides a low cost method for the development and testing of USB OTG, Host and Device applications on the dsPIC33E DSC family.
Detailed Description
The board contains an on-board programming/debugger, standard A USB and micro A/B connectors, three user-programmable LEDs, three push button switches and an expansion header compatible with the Multimedia Expansion Board (DM320005) and I/O Expansion Board (DM320002). The starter kit comes preloaded with basic Communication Device Class (CDC) demonstration software.
The top assembly of the board includes these key features, as indicated in Figure 1-1:
- dsPIC33EP512MU810 16-bit DSC device (dsPIC33E USB Starter Kit)
- Green power indicator LED (D4).
- 8 MHz crystal (Y3) for precision microcontroller clocking.
- USB connectivity for on-board debugger communications (J2).
- Three push button switches (SW1, SW2, SW3) for user-defined inputs.
- Three user-defined indicator LEDs (LED1, LED2, LED3).
- USB Type A receptacle (J6) connectivity for dsPIC33E/PIC24E USB host-based applications.
- HOST mode power jumper (J5).
- 9. Regulated +3.3V power supply for powering the starter kit via USB or an expansion board.
The starter kit contains the following items:
- dsPIC33E USB Starter Kit Development Board
- dsPIC33E USB Starter Kit Information Sheet
- USB mini-B to standard cable - USB debug cable to debug and power the board
- USB micro-B to standard cable - USB cable to communicate with the dsPIC33E USB
User Guide and Schematic Diagram
