Development System mikroElektronika Easy8051 v6

Detailed Description

Easy8051 v6 allows 8051 microcontrollers to be interfaced with numerous peripheral devices. It comes with an AT89S8253.

Very fast, on-board USB 2.0 programmer with a simplified driver installation. Serial COG Display that uses SPI interface is available for displaying text messages.On-board 16-bit I/O port expander MCP23S17 that uses SPI communication. Seven-segment displays in multiplex mode are connected to the microcontroller socket.

What's On-Board

• RS-232 communication with a PC or a microcontroller is performed via DB9 connector.
• System can be easily configured by means of DIP switches. Each DIP switch configures one part of the system.
• Temperature sensor DS1820 measures temperature from -55°C to 125°C. It is connected to the system via socket.
• 4 seven-segment displays in multiplex mode. They also have an interface to the microcontroller.
• On-board A/D converter MCP3204 with a potentiometer is used for testing multiple A/D conversions.
• USB or external power supply source is selected by moving a jumper. Power supply switch turns the system on/off.
• Voltage reference for A/D converter can be VCC (5V) or 4.096 V.
• All pins are connected to the IDC10 connectors for further expansion.
• 38 LEDs (Light Emitting Diodes) are used to indicate the logic state of all microcontroller pins.
• On-board jumpers used for pull-up/pull-down port configuration. These jumpers are available for all pins.
• 38 push buttons are used to excite microcontroller digital inputs. They are connected to all microcontrollers pins.
• DIP switch is used to separate port pins from pull-up/pull-down resistors.
• Fast, on-board USB 2.0 programmer. There is no need to connect the external programmer.
• LCD can be easily connected via the on-board connector. This connector is also connected to MCU pins.
• LCD Contrast Potentiometer is used for adjusting LCD contrast in a fast and easy way.
• System provides support for MCUs in DIP14, DIP16, DIP20, DIP28, DIP40, PLCC44 and PLCC32 pin packages.
• All MCU pins are marked on the back of the board. These marks provide basic information on the pins.
• Voltage level to be applied when a button is pressed (GND or +5V) is selected by means of the on-board jumper.
• Graphic LCD 128x64 can be easily connected via the on-board connector. It is also connected to MCU pins.
• Reset circuit is used to reset the microcontroller. It is connected to the MCLR pin of the microcontroller.
• GLCD Contrast Potentiometer is used for adjusting graphic LCD contrast.

USB 2.0 Programmer is driven by a single USB port on a PC. No additional AC power adapter is needed. The programmer is recognized by Windows, which simplifies the driver installation. The programmer board is specifically designed for In-Circuit Serial Programming (ICSP).

Examples that come with this development system will show you how to connect the 8051 microcontroller to other peripheral components or devices and how to develop your prototype device easily. Each example contains a detailed description of the relevant program including comments.

The package contains:

1. Easy8051 v6 development system.
2. USB cable.
3. CD with software, drivers and examples in C, BASIC and Pascal.
4. Printed documentation that includes: Easy8051 v6 Manual, Easy8051 v6 Schematic Diagram and Quick Guide for Installing USB Drivers.

Schematic Diagram

mikroe.com

Other Names:

Easy8051 v6, MEEasy8051 v6, Easy8051 v6, ME Easy8051 v6, Easy8051 v6 ME-Easy8051 v6, Easy8051 v6 ME-Easy8051 v6