Development Board mikroElektronika mikromedia for ARM

Detailed Description

It has numerous on-board modules, that allow you to write multimedia applications. This board can be used for both development or as a final product.

Powerful microcontroller on board

LPC2148 ARM7 is a microcontroller with 512kb of embedded high speed flash memory. A 128-bit wide memory interface and a unique accelerator architecture enable 32-bit code execution at the maximum clock rate. For critical code size applications, the alternative 16-bit Thumb mode reduces code by more than 30 % with minimal performance penalty.

Easy programming

On-board LPC2148 is programmed with fast In-System Programmer, so it’s ready to work right out of the box. You don’t have to spend a dollar more on external programmers. You can also program and debug the board using external programmer over on-board JTAG connector.

Comes with Examples

Examples that come with the board demonstrate each feature of the board and help you to get started right away.

Features:

• Having lots of MIPS power, just enough flash and RAM, and rich set of inegrated modules, LPC2148 is ideal choice for both beginners and professionals.
• Your can program the board using In-System programming, supported in the ARM7 core. No external programmers are needed for this, just a specific programming software.
• USB Device Connector is used for connecting the board with other devices such as PC using fast USB 2.0 communication.
• FTDI chip allows your mikromedia board to be connected with a PC through USB cable over UART connection.
• VS1053 MPEG audio decoder with SPI interface for fast reproduction of MP3 files.
• Plug-in your headphones and listen to audio output from mp3 decoder circuit.
• Li-Polymer battery connector allows you easier connection with your battery. Autonomous power supply will give your mikromedia the wings it deserves.
• MCP73832 Battery Charger circuit enables you to charge your Li-Polymer battery directly from USB port.
• microSD Card slot allows you to store large ammounts of data externally on microSD card using fast SPI communication.
• DC30 JTAG male connector should be used for programming and debugging the microcontroller using external programmer/debugger.
• Every unsused microcontroller pin is available through connection pads. They can be used to connect your mikromedia board with additional shields or accessory boards.
• On-Board power regulator ensures that each part of the board get the right voltages.
• On-board ADXL345 Digital Accelerometer allows you to measure acceleration.
• High quality reset button with surrounding reset circuitry ensures stable reset operation.
• Power and charge indicator LEDs are useful indicators of current power supply state of our mikromedia board.

mikroMedia for ARM is packed in the protective box along with the relevant documentation on product DVD. This box is very resistant to all kinds of damages and shocks. The package contains:

1. Damage resistant protective box
2. mikroMedia for ARM board in antistatic bag
3. USB cable
4. DVD with documentation and code examples

mikroElektronika mikromedia for ARM Development Board User Manual

mikroe.com

Other Names:

MEmikromedia for ARM, mikromedia for ARM, ME mikromedia for ARM, mikromedia for ARM, ME-mikromedia for ARM mikromedia for ARM, ME-mikromedia for ARM mikromedia for ARM