Evaluation Kit Atmel SAMA5D4-EK

Prices

Detailed Description

The kit is based on the SAMA5D44 and covers all product derivatives. The kit consists of a main board and a display module featurering a 7-inch (17.8 cm) capacitve touch screen. It is supported by the SAMA5D4 software package, a free set of bare-metal C progamming examples, and is delivered with on-board demonstrations for Linux and a Qt-based GUI. The SAMA5D4-EK allows users to extensively evaluate, prototype, and create applications that require graphics, video, audio, mass storage, networking, connectivit and more.

Key Features

• SAMA5D44-CU running at up to 528MHz
• 4Gb x 32bit DDR2 and 4Gb x 32bit NAND Flash
• SDCARD slot and µSDCARD slot
• 2 USB 2.0 host ports (Hight speed)
• 1 USB 2.0 host/device port (High speed)
• 2 10/100 Ethernet ports
• 1 Soft modem DAA (data access arrangement)
• HDMI video output
• Audio codec
• J-Link on-board and a serial debug port
• Expansion connectors, user buttons, LEDs, etc.

Main Board Features:

• SAMA5D44 CPU with its embedded resources
  • 12 MHz, 32 kHz and 25 MHz oscillators
  • Power rails.
• Memory:
  • 4x 8-bit DDR2, 512 Mbytes (Micron MT47H128M8CF-25E)
  • 1x 8-bit NAND Flash, 512 Mbytes (Micron MT29F4G08ABAEAWP),
  • 1x Serial data Flash AT25DF321,
  • 2x SD/MMC interfaces with connector,
  • 1x 1-Wire DS28E05.
• Communication:
  • 2x USB host communication ports with power switch and current limitation,
  • 1x USB host/device with power switch and current limitation,
  • 1x ETH0 10/100MHz PHY RMII, KSZ8081RNL MICREL,
  • 1x ETH1 10/100MHz PHY RMII, KSZ8081RNL MICREL shared with LCD PIO,
  • 1x Soft-Modem DAA.
• LCD, Video, ISI:
  • 1x LCD 24-bit interface connector for LCD and QTouch,
  • 1x ISI connector,
  • 1x HDMI interface Si9022 Silicon Image with connector.
• Audio:
  • Line Input (or Micro) and Headphone output,
• Debug solution:
  • 1x peripheral Input/Output extension connector HE10 (PIO A to E),
  • 1x JTAG/ICE connector,
  • 1x DBGU/USB bridge device communication interface.
• Analog:
  • Analog reference,
  • Potentiometer connected on ADC input,
  • Power lines with jumpers for current measurement.
• Buttons:
  • Disable boot, reset and wakeup pushbuttons,
  • 1x user input push button.
• LEDs:
  • 1x red power LED,
  • 1x blue user LED,
  • 1x green user LED.

The SAMA5D4-EK includes:

• Boards:
  • One SAMA5D4X-MB main board
  • One 7” display module (TM7000)
• Cables
  • One micro-AB type USB cable
  • One RJ45 crossover cable
• Power supply
  • One universal input AC/DC power supply with US, Europe and UK plug adapters
  • One CR1225 3V lithium battery
• A Welcome Letter

SAMA5D4-EK User guide and Schematic

atmel.com

Other Names:

SAMA5D4EK, SAMA5D4 EK