Evaluation Kit Atmel ATXMEGAC3-XPLD

Prices

Detailed Description

The kit offers a range of features that enable the Atmel AVR XMEGA user to get started using AVR XMEGA peripherals right away and understand how to integrate the AVR XMEGA device in their own design.

The high-performance, low-power 8/16-bit AVR XMEGA microcontroller combines 384KB in-system programmable flash memory (8KB boot code section) with read-while-write capabilities, 4KB EEPROM, 32KB SRAM, a two-channel DMA controller, a four-channel event system, a programmable multi-level interrupt controller, 50 general purpose I/O lines, a 16-bit real time counter, five flexible 16-bit timer/counters with compare, compare and PWM channels, USB Full-speed Device, three USARTs, two two-wire interfaces, two serial peripheral interfaces, one 16-channel/12-bit ADC programmable gain, two analog comparators with window mode, a programmable watchdog timer with separate internal oscillator, accurate internal oscillators with PLL and prescaler, and a programmable brown-out detection.

Key Features

• Atmel ATxmega384C3 microcontroller:
• OLED display with 128×32 pixels resolution
• Transfer data over the USB full/low speed device interface
• Read a light sensor with the ADC
• Read a temperature sensor with the ADC
• Measure external voltage input with ADC
• Two Atmel QTouch® buttons
• Two user LEDs, one power LED and one status LED
• microSD card
• Program the kit via USB bootloader or an Atmel programmer
• Expand the board with Xplained top modules

ATXMEGAC3-XPLD Evaluation Board Schematic Diagram

Other Names:

ATXMEGAC3XPLD, ATXMEGAC3 XPLD