In-Circuit Serial Programmer Elnec 8051prog2

Detailed Description

When connected to a prototype device, programmer becomes IN-SYSTEM programmer.

With ZIF socket, it becomes a standard programmer used for high volume production.

One of the possibilities for connecting 8051prog2 to a microcontroller is via an IDC10 connector. Look at the picture on the right side. All you have to do is to put one 2x5 connector between microcontroller and other parts of the board. Inserting 8051prog2 connector you will be able to program 8051 In-System.

These lines are contained within a flat cable ending with an IDC10 female connector. When creating a target device, the appropriate 10-pin male connector with 2.54 mm space between pins should be placed on it. Connector pins should be connected to the microcontroller pins. Their position varies depending on the microcontroller's type and package.

8051prog2 programmer supports wide range of Atmel 8051 microcontrollers. Newly released 8051 microcontrollers will be supported with new version of 8051Flash software that is updated regularly. The following microcontrollers are supported by programmer:

The development tool is packed in the protective box along with documentation and software CD. This box is very ressistant to any kinds of damages and shocks. Package contains:

• Package
• 8051prog2 USB2.0 programmer.
• USB cable.
• CD with software and drivers.
• Printed Documentation that includes: 8051prog2 Manual and Quick Guide for Installing USB Drivers.
• The Box is very resistant to shock and transport damage.