Development board Olimex PIC-MAXI-WEB

Detailed Description

This board allow you to develop easy Ethernet connectivity application.

It have everything you normally would need for such activity: power relays which you can command through web interface. LCD display which will display messages you fill in web forms, analogue inputs for connection to sensors, digital optoisolated inputs, trimmer potentiometer, temperature sensor, Ethernet connector. With this board you can easy automate your home and then control and monitor it from any point in the world via Internet. The extension connector is available so you can connect your cusom made hardware hassle free. The PIC18F97J60 have 128KB Flash programming memory and there is external 1Mbit (128KB) flash memory for data storage. The on board DC/DC converter make this board to be very tolerant to the external power supply which could be in 9-25V DC or 7-18V AC range, the bridge rectifire on the input allow AC and DC adapters to be used and makes power supply polarity problems go away.

FEATURES:

• PIC18F97J60 microcontroller with embedded Ethernet MAC and PHY and 128KB Flash programming space
• 1Mbit on board serial flash for web pages storage
• ICSP/ICD connector for programming and debugging with PIC-ICD2 and PIC-ICD2-POCKET.
• Temperature sensor
• Trimmer potentiometer connected to analogue input
• Two relays 10A/250VAC
• Four optoisolated digital inputs
• Twelve analogue inputs on terminal block
• Two buttons
• LCD16×2 with backlight
• RS232 interface
• Ethernet interface
• Complete web server and TCP-IP stack support as per Microchip's open source TCP-IP stack
• Terminal block for power supply works with 9-25 VDC power supply
• Extension header to connect to other boards
• Dimensions 120×108 mm (4.72×4.25")

Schematic diagram PIC-MAXI-WEB Development board

Click to enlarge

Other Names:

PICMAXIWEB, PIC MAXI WEB