Evaluation board Propox EVBAVR04
EVBavr04 is a development board designer for the hobbyist and engineers who want to quickly prototype their system based on AVR microcontrollers from Atmel.
Detailed Description
Developer has access to all pins of the micro, which are brought to the header (pin connectors) and labeled accordingly. Depending upon the board`s configuration (listed versions) some or all of the following components are found on the board: thermometer DS1820, potentiometer, relay, buzzer, RTC (real time clock), 1-wire connector, I2C connector, 7-segment LEDs and LCD display (2x16). The pin headers provided allow easy access to all these components. In addition, there are eight micro-switches and eight diodes which could be connected to any of the pin connectors or additional components, which may be placed on the large, adjacent prototype area. The power circuitry on board (bridge, voltage regulator) eliminates the need for an external regulated power supply.
This board comes with the several examples of the C code routines (source from), to facilitate testing and quick development in using the board`s resources.
Features:
- Prototype area
- Additional components connector
- LEDs and micro-switches
- Potentiometer
- DS1820 thermometer
- RESET switch and power LED
- LCD display 2x16 (optionally)
- Four 7-segment LEDs
- Buzzer
- 1-Wire connector
- I2C connector
- RS232 connector
- LM317 regulator allownig to connect unstabilized voltage
- Board supply on-switch
- Input of supply voltage with rectifier bridge allowing supply with voltage DC lub AC
- Relay`s connector enclosed to the relay on the board
- programmer connector
- Led out and doubled processor ports
- Socket for processors ATmega8 and ATmega48/88/168
- LCD display connector allowing to link different types of displays
- 3.6 V accumulator
- DS1307 Real Time Clock
Schematic diagram EVBAVR04 board
