Development Prototype Board Olimex AVR-PX128A1

AVR-PX128A1 - AVR Microcontroller Development Prototype Board For ATxMega128A1.

Detailed Description

AVR-PX128A1 board is entry level development board for the new AVR XMEGA.

A Microcontroller family of devices produced by Atmel Corporation. With AVR-PX128A1 you can explore the features of XMEGA A family on budged, the board have everything necessary to build simple applications: USB port where power is taken and power supply circuit, reset and oscillator circuits, JTAG and PDI port for programming and debugging, LCD, status LED and two user buttons. Although very simple this board will allow you to easily build USB application like USB mass storage device, USB Audio class device, USB to Virtual RS232 port. There are plenty of GPIOs on extension headers where you can connect your additional circuits.

Olimex AVR-PX128A1

BOARD FEATURES

CPU: ATXMEGA128A1 AVR 8/16-bit XMEGATM
JTAG connector with standard 2x5 pin layout for programming/debugging with JTAGICE mkII
PDI connector with 2×3 pin layout for programming/debugging with JTAGICE mkII
USB connector
two user buttons
RESET button
status LED
power supply LED
on board voltage regulator 3.3V with up to 800mA current
single power supply: 6V AC or 9V DC required, board can take power from USB port too
8 Mhz crystal oscillator
32768 Hz crystal and RTC
extension header
SD/MMC card connector
Audio in and Audio Out jacks for microphone and headphones
LCD 8×1
PCB: FR-4, 1.5 mm (0,062"), red soldermask, silkscreen component print
Dimensions: 100 × 80mm (3.9 × 3.15")

Schematic diagram AVR-PX128A1 Development Board

olimex.com

Other Names:

AVR/AVRPX128A1, AVR/AVR PX128A1