Development board mikroElektronika XMEGA-Ready Board

Detailed Description

Tool features ATxmega128A1 device that is connected to 8Mhz oscillator circuit. Voltage regulation is available on-board, so you don't have to add any more power supply electronics. To power-up board you only need to connect 7-23V AC or 9-32V DC power supply via screw terminal and the board is running.

It includes connectors for connecting the External programmer and JTAG. These connectors enable connect devices for in-circuit debugging and firmware programming. This board features a FT232R IC - USB to Serial UART interface which simplifies USB to serial conversion. This way, you can connected this tool to PC USB Port or other USB Host devices. It also contains prototyping area that allows user to add various electronic components. Also VCC and GND lines are availiable. Every pin of the on-board device can be connected with external circuits using connection pads.

Features:

• This board is controlled ATxmega128A1 - Low power, high performance and peripheral rich AVR® based microcontroller.
• There are connectors on-board for in-circuit debugging and programming with AVR ISP and JTAG.
• Prototype Area enables users to add various electronic components. Also VCC and GND lines are provided.
• Power supply 7-23V AC or 9-32V DC can be connected via screw terminal.
• Microcontroller is connected to 8Mhz oscillator circuit which provides external clock.
• On-board USB UART module features the FT232RL - An interface between a USB device and the microcontroller.
• All pins are marked on the board. These marks describe connections, modes, and some other useful notes

Examples that comes with this board will demonstrate ATxmega128A1 functionality with simple and practical examples. Each example contains detailed description and comments of the program. All examples can be downloaded from this page as well.

Schematic diagram XMEGA-Ready Board

mikroe.com

Other Names:

XMEGAReady Board, XMEGA Ready Board