Datasheet HSMS-2850-TR1G - Avago Technologies DIODE, RF, SCHOTTKY, SOT-23

Avago Technologies HSMS-2850-TR1G

Part Number: HSMS-2850-TR1G

Detailed Description

Manufacturer: Avago Technologies

Description: DIODE, RF, SCHOTTKY, SOT-23

Docket:
HSMS-285x Series
Surface Mount Zero Bias Schottky Detector Diodes
Data Sheet
Description
Avago's HSMS-285x family of zero bias Schottky detector diodes has been designed and optimized for use in small signal (Pin < -20 dBm) applications at frequencies below 1.5 GHz.

They are ideal for RF/ID and RF Tag applications where primary (DC bias) power is not available. Important Note: For detector applications with input power levels greater than 20 dBm, use the HSMS-282x series at frequencies below 4.0 GHz, and the HSMS-286x series at frequencies above 4.0 GHz. The HSMS-285x series IS NOT RECOMMENDED for these higher power level applications. Available in various package configurations, these detector diodes provide low cost solutions to a wide variety of design problems. Avago's manufacturing techniques assure that when two diodes are mounted into a single package, they are taken from adjacent sites on the wafer, assuring the highest possible degree of match.

Specifications:

Capacitance Ct: 0.3 pF
Device Marking: P0
Diode Configuration: Single
Diode Type: RF Schottky
Forward Current If Max: 1 mA
Forward Current If(AV): 150 mA
Forward Voltage VF Max: 250 mV
Forward Voltage: 250 mV
Mounting Type: SMD
Number of Pins: 3
Package / Case: SOT-23
Power Dissipation Max: 75 mW
Repetitive Reverse Voltage Vrrm Max: 2 V
Reverse Voltage Vr Max: 2 V
SMD Marking: P0
SVHC: No SVHC (15-Dec-2010)
Tape Width: 8 mm
Thermal Capacitance Ct: 0.3 pF

RoHS: Yes

Accessories:

Electrolube - SMA10SL
Roth Elektronik - RE901

Other Names:

HSMS2850TR1G, HSMS 2850 TR1G