Datasheet Texas Instruments THS4531IDGK
| Manufacturer | Texas Instruments |
| Series | THS4531 |
| Part Number | THS4531IDGK |
Ultra low power 0.25mA, RRO, fully differential amplifier 8-VSSOP -40 to 125
Datasheets
Ultra Low Power, Rail-to-Rail Output, Fully-Differential Amplifier datasheet
PDF, 1.2 Mb, Revision: B, File published: Mar 2, 2012
Extract from the document
Prices
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
Packaging
| Pin | 8 |
| Package Type | DGK |
| Industry STD Term | VSSOP |
| JEDEC Code | R-PDSO-G |
| Package QTY | 80 |
| Carrier | TUBE |
| Device Marking | 4531 |
| Width (mm) | 3 |
| Length (mm) | 3 |
| Thickness (mm) | .97 |
| Pitch (mm) | .65 |
| Max Height (mm) | 1.07 |
| Mechanical Data | Download |
Parametrics
| 2nd Harmonic | 128 dBc |
| 3rd Harmonic | 137 dBc |
| @ MHz | 0.001 |
| Acl, min spec gain | 1 V/V |
| BW @ Acl | 36 MHz |
| CMRR(Typ) | 116 dB |
| GBW(Typ) | 30 MHz |
| Input Bias Current(Max) | 210000 pA |
| Iq per channel(Max) | 0.25 mA |
| Iq per channel(Typ) | 0.25 mA |
| Number of Channels | 1 |
| Operating Temperature Range | -40 to 125 C |
| Output Current(Typ) | 26 mA |
| Package Group | VSSOP |
| Package Size: mm2:W x L | 8VSSOP: 15 mm2: 4.9 x 3(VSSOP) PKG |
| Rail-to-Rail | Out |
| Rating | Catalog |
| Slew Rate(Typ) | 220 V/us |
| Total Supply Voltage(Max) | 5.5 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 2.5 +5V=5, +/-5V=10 |
| Vn at Flatband(Typ) | 10 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 1 mV |
Eco Plan
| RoHS | Compliant |
Design Kits & Evaluation Modules
- Evaluation Modules & Boards: THS4531DGKEVM
THS4531 Evaluation Module in DGK package
Lifecycle Status: Active (Recommended for new designs) - Development Kits: LAUNCHXL-F28379D
C2000 Delfino MCUs F28379D LaunchPad Development Kit
Lifecycle Status: Active (Recommended for new designs)
Application Notes
- Using fully differential op amps as attenuators, Part 1PDF, 554 Kb, File published: May 1, 2009
- Using fully differential op amps as attenuators, Part 3PDF, 568 Kb, File published: Oct 4, 2009
- Using fully differential op amps as attenuators, Part 2PDF, 531 Kb, File published: Jul 14, 2009
- Analysis of fully differential amplifiersPDF, 295 Kb, File published: Mar 11, 2005
- Fully-Differential Amplifiers (Rev. E)PDF, 867 Kb, Revision: E, File published: Sep 19, 2016
Differential signaling has been commonly used in audio, data transmission, and telephone systems for many years because of its inherent resistance to external noise sources. Today, differential signaling is becoming popular in high-speed data acquisition, where the ADC’s inputs are differential and a differential amplifier is needed to properly drive them.Two other advantages of di - Designing for low distortion with high-speed op ampsPDF, 277 Kb, File published: Mar 2, 2005
- Noise Analysis for High Speed Op Amps (Rev. A)PDF, 256 Kb, Revision: A, File published: Jan 17, 2005
As system bandwidths have increased an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not however particularly comfortable with the calculations required to predict the total noise for an op amp or in the conversions between the different descriptions of noise. Considerable inconsistency between manufactu
Model Line
Series: THS4531 (6)
- THS4531ID THS4531IDGK THS4531IDGKR THS4531IDR THS4531IRUNR THS4531IRUNT
Manufacturer's Classification
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > Fully Differential Amplifiers
