Datasheet Microchip PIC32MX534F064L-I/PF

Manufacturer	Microchip
Series	PIC32MX534F064L
Part Number	PIC32MX534F064L-I/PF

Datasheets

Download

PDF, 3.8 Mb, Revision: 09-19-2016

Extract from the document

PIC32MX5XX/6XX/7XX
32-bit Microcontrollers (up to 512 KB Flash and 128 KB SRAM)
with Graphics Interface, USB, CAN, and Ethernet
Operating Conditions Timers/Output Compare/Input Capture 2.3V to 3.6V, -40ВєC to +105ВєC, DC to 80 MHz В® Core: 80 MHz/105 DMIPS MIPS32 M4K Five General Purpose Timers:
-Five 16-bit and up to two 32-bit Timers/Counters Five Output Compare (OC) modules Five Input Capture (IC) modules Real-Time Clock and Calendar (RTCC) module В® MIPS16eВ® mode for up to 40% smaller code size Code-efficient (C and Assembly) architecture Single-cycle (MAC) 32x16 and two-cycle 32x32 multiply Communication Interfaces Clock Management USB 2.0-compliant Full-Speed OTG controller 10/100 Mbps Ethernet MAC with MII and RMII interface CAN module:
-2.0B Active with DeviceNetв„ў addressing support Six UART modules (20 Mbps):
-Supports LIN 2.1 protocols and IrDAВ® support Up to four 4-wire SPI modules (25 Mbps) Up to five I2C modules (up to 1 Mbaud) with SMBus
support Parallel Master Port (PMP) 0.9% internal oscillator (on some variants)
Programmable PLLs and oscillator clock sources
Fail-Safe Clock Monitor (FSCM)
Independent Watchdog Timer
Fast wake-up and start-up Power Management Low-power management modes (Sleep and Idle)
Integrated Power-on Reset, Brown-out Reset
0.5 mA/MHz dynamic current (typical)
41 ВµA IPD current (typical) Direct Memory Access (DMA) Up to eight channels of hardware DMA with automatic
data size detection 32-bit Programmable Cyclic Redundancy Check (CRC) Six additional channels dedicated to USB, Ethernet and
CAN modules Graphics Features External graphics interface with up to 34 Parallel Master
Port (PMP) pins:
-Interface to external graphics controller
-Capable of driving LCD directly with DMA and
internal or external memory Input/Output 15 mA or 10 mA source/sink for standard VOH/VOL and
up to 22 mA for non-standard VOH1 5V-tolerant pins Selectable open drain and pull-ups External interrupts Analog Features ADC Module:
-10-bit 1 Msps rate with one Sample and Hold (S&H) …

Prices

Status

Lifecycle Status

Production (Appropriate for new designs but newer alternatives may exist)

Packaging

Package	TQFP
Pins	100

Parametrics

# of Comparators	2
ADCC with Computation	No
Angular Timer	No
Architecture	32
CPU	32-bit MIPS MCU
CRC/Scan	Yes
Cap. Touch Channels	16
EEPROM / HEF	0 / HEF
High Voltage Capable	No
I2C	5
Internal Oscillator	8 MHz, 32 kHz
Internal Voltage Reference	No Bandgap
Math Accelerator	No
Max # PWM outputs	5 including complementary outputs
Max 16 Bit Digital Timers	5
Max A/D Resolution	10 bits
Max PWM Resolution	16 bits
Max. CPU Speed MHz	80
Number of USB Modules	1
Operating Temperature Range	-40 to +85 °C
Operation Voltage Max.(V)	3.6
Operation Voltage Min.(V)	2.3
Peripheral Pin Select	No PPS
Pin count	100
Program Memory Size	64 Kbytes
RAM	16384 bytes
SPIв„ў	4
Temp. Range Max.	105
Temp. Range Min.	-40
Total # of A/D channels	16
UART	6
Windowed Watchdog Timer	No WWDT
Zero Cross detect	No

Eco Plan

RoHS

Compliant

Other Options

PIC32MX534F064H PIC32MX564F064H PIC32MX564F064L PIC32MX564F128H PIC32MX564F128L PIC32MX575F256H PIC32MX575F256L PIC32MX575F512H PIC32MX575F512L PIC32MX664F064H PIC32MX664F064L PIC32MX664F128H PIC32MX664F128L PIC32MX675F256H PIC32MX675F256L PIC32MX675F512H PIC32MX675F512L PIC32MX695F512H PIC32MX695F512L PIC32MX764F128H PIC32MX764F128L PIC32MX775F256H PIC32MX775F256L PIC32MX775F512H PIC32MX775F512L PIC32MX795F512H PIC32MX795F512L

Model Line

Series: PIC32MX534F064L (12)

PIC32MX534F064L-I/BG PIC32MX534F064L-I/PF PIC32MX534F064L-I/PT PIC32MX534F064L-V/BG PIC32MX534F064L-V/PF PIC32MX534F064L-V/PT PIC32MX534F064LT-I/BG PIC32MX534F064LT-I/PF PIC32MX534F064LT-I/PT PIC32MX534F064LT-V/BG PIC32MX534F064LT-V/PF PIC32MX534F064LT-V/PT

Other Names:

PIC32MX534F064LI/PF, PIC32MX534F064L I/PF