Datasheet Texas Instruments LMZ20501SILR
| Manufacturer | Texas Instruments |
| Series | LMZ20501 |
| Part Number | LMZ20501SILR |
SIMPLE SWITCHER® 2.7V to 5.5V, 1A High Density Nano Module 8-uSiP -40 to 125
Datasheets
LMZ20501 1.0 A SIMPLE SWITCHERВ® Nano Module datasheet
PDF, 1.9 Mb, Revision: C, File published: Apr 24, 2015
Extract from the document
Prices
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
Packaging
| Pin | 8 | 8 | 8 | 8 | 8 |
| Package Type | SIL | SIL | SIL | SIL | SIL |
| Package QTY | 3000 | 3000 | 3000 | 3000 | 3000 |
| Carrier | LARGE T&R | LARGE T&R | LARGE T&R | LARGE T&R | LARGE T&R |
| Device Marking | TXN5202EC | 1501 | 7543 | 1501 7543 EB | EB |
Parametrics
| Iout(Max) | 1 A |
| Iq(Typ) | 0.072 mA |
| Operating Temperature Range | -40 to 125 C |
| Package Type | MicroSiP (LGA) |
| Regulated Outputs | 1 |
| Soft Start | Fixed |
| Special Features | EMI Tested,Enable,Light Load Efficiency,Power Good |
| Switching Frequency(Max) | 3200 kHz |
| Switching Frequency(Min) | 2500 kHz |
| Switching Frequency(Typ) | 3000 kHz |
| Vin(Max) | 5.5 V |
| Vin(Min) | 2.7 V |
| Vout(Max) | 3.6 V |
| Vout(Min) | 0.8 V |
Eco Plan
| RoHS | Compliant |
Design Kits & Evaluation Modules
- Evaluation Modules & Boards: LMZ20501EVM
LMZ20501 1A SIMPLE SWITCHERВ® Nano Module Evaluation Board
Lifecycle Status: Active (Recommended for new designs)
Application Notes
- AN-2169 LMZ10501 and LMZ10500 SIMPLE SWITCHER Nano Module (Rev. A)PDF, 298 Kb, Revision: A, File published: Apr 23, 2013
The LMZ10501 and LMZ10500 SIMPLE SWITCHER nano modules are easy-to-use DC-DC solutionsoptimized for space-constrained applications. The LMZ10501 is capable of driving up to 1A load withexcellent power conversion efficiency, line and load regulation. The LMZ10500 is a 650mA version moduleand is pin-to-pin compatible with the LMZ10501. - Understanding and Applying Current-Mode Control TheoryPDF, 409 Kb, File published: Aug 19, 2007
- AN-643 EMI/RFI Board Design (Rev. B)PDF, 742 Kb, Revision: B, File published: May 3, 2004
Application Note 643 EMI/RFI Board Design - AN-1889 How to Measure the Loop Transfer Function of Power Supplies (Rev. A)PDF, 2.7 Mb, Revision: A, File published: Apr 23, 2013
This application report shows how to measure the critical points of a bode plot with only an audiogenerator (or simple signal generator) and an oscilloscope. The method is explained in an easy to followstep-by-step manner so that a power supply designer can start performing these measurements in a shortamount of time.
Model Line
Series: LMZ20501 (2)
- LMZ20501SILR LMZ20501SILT
Manufacturer's Classification
- Semiconductors > Power Management > Power Modules > Non-Isolated Module > Step-Down (Buck) Module
