Datasheet Texas Instruments LM111H/NOPB

ManufacturerTexas Instruments
SeriesLM111-N
Part NumberLM111H/NOPB
Datasheet Texas Instruments LM111H/NOPB

Voltage Comparator 8-TO-99 -55 to 125

Datasheets

LM111/LM211/LM311 Voltage Comparator datasheet
PDF, 1.7 Mb, Revision: E, File published: Mar 27, 2013
Extract from the document

Prices

Status

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityYes

Packaging

Pin88
Package TypeLMCLMC
Industry STD TermTO-CANTO-CAN
JEDEC CodeO-MBCY-WO-MBCY-W
Package QTY500500
Device MarkingLM111HLM111H
Width (mm)9.089.08
Length (mm)9.089.08
Thickness (mm)4.44.4
Pitch (mm)2.542.54
Max Height (mm)5.725.72
Mechanical DataDownloadDownload

Parametrics

Input Bias Current (+/-)(Max)100 nA
Iq per channel(Max)6 mA
Number of Channels1
Operating Temperature Range-55 to 125 C
Output TypeOpen Collector, Open Drain
Package GroupTO-99
Package Size: mm2:W x L8TO-99: 80 mm2: 8.96 x 8.96(TO-99) PKG
Propagation Delay Time0.2 uS
Rail-to-RailNo
RatingCatalog
Special FeaturesStrobe,Vos Adj Pin
VICR(Max)34 V
VICR(Min)0.5 V
Vos (Offset Voltage @ 25C)(Max)3 mV
Vs(Max)36 V
Vs(Min)5 V

Eco Plan

RoHSCompliant

Application Notes

  • Circuit Techniques for Avoiding Oscillations in Comparator Applications
    PDF, 96 Kb, File published: Oct 2, 2002
  • AN-46 The Phase Locked Loop IC as a Communication System Building Block
    PDF, 314 Kb, File published: May 14, 2004
  • Microvolt Comparator
    PDF, 85 Kb, File published: Oct 2, 2002
  • LB-12 An IC Voltage Comparator for High Impedance Circuitry (Rev. B)
    PDF, 140 Kb, Revision: B, File published: May 6, 2013
    The IC voltage comparators available in the past have been designed primarily for low voltage, high-speedoperation. As a result, these devices have high input error currents, which limit their usefulness in highimpedance circuitry. An IC is described here that drastically reduces these error currents, with only amoderate decrease in speed.
  • AN-41 Precision IC Comparator Runs from +5V Logic Supply (Rev. B)
    PDF, 344 Kb, Revision: B, File published: May 1, 2013
    In digital systems, it is sometimes necessary to convert low level analog signals into digital information. Anexample of this might be a detector for the illumination level of a photo-diode. Another would be a zerocrossing detector for a magnetic transducer such as a magnetometer or a shaft-position pickoff. Thesetransducers have low-level outputs, with currents in the low microamperes or vo

Model Line

Series: LM111-N (3)

Manufacturer's Classification

  • Semiconductors > Space & High Reliability > Amplifier > Comparator