Datasheet Texas Instruments LM5017MRX/NOPB
Manufacturer | Texas Instruments |
Series | LM5017 |
Part Number | LM5017MRX/NOPB |
7.5-100V Wide Vin, 600mA Constant On-Time Synchronous Buck Regulator 8-SO PowerPAD -40 to 125
Datasheets
LM5017 100-V, 600-mA Constant On-Time Synchronous Buck Regulator datasheet
PDF, 2.0 Mb, Revision: I, File published: Oct 21, 2015
Extract from the document
Prices
Status
Lifecycle Status | Active (Recommended for new designs) |
Manufacture's Sample Availability | No |
Packaging
Pin | 8 | 8 |
Package Type | DDA | DDA |
Industry STD Term | HSOIC | HSOIC |
JEDEC Code | R-PDSO-G | R-PDSO-G |
Package QTY | 2500 | 2500 |
Carrier | LARGE T&R | LARGE T&R |
Device Marking | L5017 | MR |
Width (mm) | 3.9 | 3.9 |
Length (mm) | 4.89 | 4.89 |
Thickness (mm) | 1.48 | 1.48 |
Pitch (mm) | 1.27 | 1.27 |
Max Height (mm) | 1.7 | 1.7 |
Mechanical Data | Download | Download |
Parametrics
Control Mode | Constant on-time (COT) |
Duty Cycle(Max) | 90 % |
Iout(Max) | 0.65 A |
Iq(Typ) | 1.75 mA |
Operating Temperature Range | -40 to 125 C |
Package Group | SO PowerPAD |
Rating | Catalog |
Regulated Outputs | 1 |
Special Features | Synchronous Rectification,UVLO Adjustable |
Switching Frequency(Max) | 1000 kHz |
Switching Frequency(Min) | 50 kHz |
Type | Converter |
Vin(Max) | 100 V |
Vin(Min) | 7.5 V |
Vout(Max) | 90 V |
Vout(Min) | 1.25 V |
Eco Plan
RoHS | Compliant |
Design Kits & Evaluation Modules
- Evaluation Modules & Boards: LM5017ISOEVAL
LM5017 Isolated Bias Supply Evaluation Board
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: LM5017EVAL
LM5017 Wid Vin Synchronous Buck Regulator Evaluation Board
Lifecycle Status: Active (Recommended for new designs)
Application Notes
- Is Your IGBT Gate-Driver Power Supply OptimizedPDF, 115 Kb, File published: Mar 12, 2015
Insulated Gate Bipolar Transistors (IGBTs) are used in high current three-phase AC motors. This application report discusses the theory and requirements of gate-drive power supply for IGBTs. It also discusses the isolation requirements and calculation of correct amount of IGBT drive power. - DC E-meter SMPS design using LM5017 in Isolated buck topology for BTS SheltersPDF, 1.0 Mb, File published: Mar 28, 2014
- Fly-Buck(TM) converter provides EMC and isolation in PLC applicationsPDF, 201 Kb, File published: Jan 29, 2015
- AN-2292 Designing an Isolated Buck (Fly-Buck) Converter (Rev. C)PDF, 870 Kb, Revision: C, File published: Dec 17, 2014
In many applications, one or more low-cost, simple to use, isolated power supplies working from input voltages up to 100 V are needed. Traditional solutions use flyback converters to generate this bias supply. Flyback designs typically utilize asymmetric transformers turns ratios for primary and secondary power windings, with an optocoupler and reference, or an auxiliary winding for feedback regul - AN-2171 Designing Constant-On-Time Buck Regulators for Low Drop-Out Voltage (Rev. A)PDF, 78 Kb, Revision: A, File published: Apr 23, 2013
This application note presents a simple scheme to improve the drop-out voltage in constant-on-time buckregulators.
Model Line
Series: LM5017 (6)
- LM5017MR/NOPB LM5017MRE/NOPB LM5017MRX/NOPB LM5017SD/NOPB LM5017SDE/NOPB LM5017SDX/NOPB
Manufacturer's Classification
- Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Step-Down (Buck) > Buck Converter (Integrated Switch)