Datasheet Texas Instruments DAC902E
| Manufacturer | Texas Instruments |
| Series | DAC902 |
| Part Number | DAC902E |
12-Bit 165-MSPS Digital-to-Analog Converter (DAC) 28-TSSOP -40 to 85
Datasheets
DAC902 SpeedPlus 12-Bit 165-MSPS Digital-to-Analog Converter datasheet
PDF, 1.0 Mb, Revision: B, File published: May 29, 2002
Extract from the document
Prices
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
Packaging
| Pin | 28 |
| Package Type | PW |
| Industry STD Term | TSSOP |
| JEDEC Code | R-PDSO-G |
| Package QTY | 50 |
| Carrier | TUBE |
| Device Marking | DAC902E |
| Width (mm) | 4.4 |
| Length (mm) | 9.7 |
| Thickness (mm) | 1 |
| Pitch (mm) | .65 |
| Max Height (mm) | 1.2 |
| Mechanical Data | Download |
Parametrics
| Architecture | Current Source |
| DAC Channels | 1 |
| Interface | Parallel CMOS |
| Interpolation | 1x |
| Operating Temperature Range | -40 to 85 C |
| Package Group | TSSOP |
| Package Size: mm2:W x L | 28TSSOP: 62 mm2: 6.4 x 9.7(TSSOP) PKG |
| Power Consumption(Typ) | 170 mW |
| Rating | Catalog |
| Resolution | 12 Bits |
| SFDR | 67 dB |
| Sample / Update Rate | 200 MSPS |
Eco Plan
| RoHS | Compliant |
Design Kits & Evaluation Modules
- Evaluation Modules & Boards: DAC902EVM
DAC902 12-Bit 165-MSPS Digital-to-Analog Converter (DAC) Evaluation Module
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: TSW2200EVM
TSW2200 Low-Cost Portable Power Supply Evaluation Module
Lifecycle Status: Active (Recommended for new designs)
Application Notes
- Interfacing op amps to high-speed DACs, Part 2: Current-sourcing DACsPDF, 617 Kb, File published: Oct 4, 2009
- High Speed Digital-to-Analog Converters Basics (Rev. A)PDF, 829 Kb, Revision: A, File published: Oct 23, 2012
- Q4 2009 Issue Analog Applications JournalPDF, 1.5 Mb, File published: Oct 4, 2009
- Wideband Complementary Current Output DAC Single-Ended InterfacePDF, 597 Kb, File published: Jun 21, 2005
High-speed digital-to-analog converters (DACs) most often use a transformer-coupled output stage. In applications where this configuration is not practical, a single op ampdifferential to single-ended stage has often been used. This application note steps through the exact design equations required to achieve gain matching from each output as well as a matched input impedance to each of the DA
Model Line
Series: DAC902 (4)
- DAC902E DAC902E/2K5 DAC902U DAC902U/1K
Manufacturer's Classification
- Semiconductors > Data Converters > Digital-to-Analog Converters (DACs) > High Speed DACs (>10MSPS)
