Datasheet Texas Instruments ADC10D1000CIUT

Manufacturer	Texas Instruments
Series	ADC10D1000
Part Number	ADC10D1000CIUT

10-Bit, Dual 1.0-GSPS or Single 2.0-GSPS Analog-to-Digital Converter (ADC) 292-BGA -40 to 85

Datasheets

Download

PDF, 2.0 Mb, Revision: Q, File published: Mar 15, 2013

Extract from the document

Prices

Status

Lifecycle Status	Active (Recommended for new designs)
Manufacture's Sample Availability	No

Packaging

Pin	292	292
Package Type	NXA	NXA
Industry STD Term	BGA	BGA
JEDEC Code	S-PBGA-N	S-PBGA-N
Package QTY	40	40
Carrier	JEDEC TRAY (10+1)	JEDEC TRAY (10+1)
Device Marking	ADC10D1000	CIUT
Width (mm)	27	27
Length (mm)	27	27
Thickness (mm)	2.38	2.38
Pitch (mm)	1.27	1.27
Max Height (mm)	2.4	2.4
Mechanical Data	Download	Download

Parametrics

# Input Channels	2,1
Analog Input BW	2800 MHz
Architecture	Folding Interpolating
DNL(Max)	0.25 +/-LSB
DNL(Typ)	0.25 +/-LSB
ENOB	9.1 Bits
INL(Max)	0.65 +/-LSB
INL(Typ)	0.65 +/-LSB
Input Buffer	Yes
Input Range	0.8 Vp-p
Interface	Parallel LVDS
Operating Temperature Range	-40 to 85 C
Package Group	BGA
Package Size: mm2:W x L	292BGA: 729 mm2: 27 x 27(BGA) PKG
Power Consumption(Typ)	2770 mW
Rating	Catalog
Reference Mode	Int
Resolution	10 Bits
SFDR	70 dB
SINAD	56.5 dB
SNR	57 dB
Sample Rate(Max)	1000,2000 MSPS

Eco Plan

RoHS	See ti.com

Design Kits & Evaluation Modules

Evaluation Modules & Boards: ADC-WB-BB
ADC Wide Band Balun Board
Lifecycle Status: Active (Recommended for new designs)
- Download
Evaluation Modules & Boards: ADC-LD-BB
ADC Low Distortion Balun Board
Lifecycle Status: Active (Recommended for new designs)
- Download
Evaluation Modules & Boards: ADC10D1500RB
The ADC10D1500 is a Low-Power, 10-Bit, Dual 1.5 GSPS or Single 3.0 GSPS AD Converter Reference Board
Lifecycle Status: Active (Recommended for new designs)
- Download

Application Notes

Download
AN-2128 ADC1xD1x00 Pin Compatibility (Rev. C)
PDF, 60 Kb, Revision: C, File published: May 1, 2013
In order to facilitate upgrading applications from a 10-bit Gig ADC to a 12-bit Gig ADC, the ADC10D1x00(ADC10D1500/ADC10D1000) is designed to be pin-compatible with the ADC12D1x00(ADC12D1800/1600/1000). This means that a single board layout may be designed with both resolutionADCs in mind for more cost efficient and time-to-market product development.
Download
AN-2177 Using the LMH6554 as a ADC Driver (Rev. A)
PDF, 1.7 Mb, Revision: A, File published: Apr 26, 2013
This application report discusses the use of the Texas Instruments LMH6554 as an ADC driver.
Download
From Sample Instant to Data Output: Understanding Latency in the GSPS ADC
PDF, 392 Kb, File published: Dec 18, 2012
For many applications which use ultra high-speed ADCs, latency can be a critical performance specification. For example, if the ADC is used in any kind of feedback loop, then the absolute latency is an important factor. For a MIMO system such as a phased array radar, the relative difference and variability in latency becomes important. This application note covers latency in the GSPS ADC products,
Download
AN-2132 Synchronizing Multiple GSPS ADCs in a System: The AutoSync Feature (Rev. G)
PDF, 169 Kb, Revision: G, File published: Feb 3, 2017
Download
Maximizing SFDR Performance in the GSPS ADC: Spur Sources and Methods of Mitigat
PDF, 720 Kb, File published: Dec 9, 2013
The SFDR performance of an ADC is limited by the largest spur in the spectrum from DC to Fs / 2. These spurs can either be reduced or avoided entirely for maximum SFDR performance, based on the application. This reference design explores the reason behind spurs in the 10-bit and 12-bit GSPS ADCfamily. The specific products covered are: ADC12D1800RF, ADC12D1600RF, ADC12D1000RF, ADC12D800RF, ADC12

Model Line

Series: ADC10D1000 (2)

ADC10D1000CIUT ADC10D1000CIUT/NOPB

Manufacturer's Classification

Semiconductors > Data Converters > Analog-to-Digital Converters (ADCs) > High Speed ADCs (>10MSPS)