Datasheet Texas Instruments OPA653IDBVT
| Manufacturer | Texas Instruments |
| Series | OPA653 |
| Part Number | OPA653IDBVT |
500MHz, Fixed Gain of +2V/V, JFET input amplifier 5-SOT-23 -40 to 85
Datasheets
Wideband, Fixed Gain, JFET-Input Amplifier datasheet
PDF, 1.2 Mb, Revision: A, File published: Nov 4, 2009
Extract from the document
Prices
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
Packaging
| Pin | 5 |
| Package Type | DBV |
| Industry STD Term | SOT-23 |
| JEDEC Code | R-PDSO-G |
| Package QTY | 250 |
| Carrier | SMALL T&R |
| Device Marking | BZW |
| Width (mm) | 1.6 |
| Length (mm) | 2.9 |
| Thickness (mm) | 1.2 |
| Pitch (mm) | .95 |
| Max Height (mm) | 1.45 |
| Mechanical Data | Download |
Parametrics
| 2nd Harmonic | 75 dBc |
| 3rd Harmonic | 96 dBc |
| @ MHz | 10 |
| Acl, min spec gain | 2 V/V |
| Additional Features | Decompensated |
| Architecture | FET |
| BW @ Acl | 500 MHz |
| CMRR(Min) | 62 dB |
| CMRR(Typ) | 66 dB |
| GBW(Typ) | 500 MHz |
| Input Bias Current(Max) | 50 pA |
| Iq per channel(Max) | 33 mA |
| Iq per channel(Typ) | 32 mA |
| Number of Channels | 1 |
| Offset Drift(Typ) | 10 uV/C |
| Operating Temperature Range | -40 to 85 C |
| Output Current(Typ) | 70 mA |
| Package Group | SOT-23 |
| Package Size: mm2:W x L | 5SOT-23: 8 mm2: 2.8 x 2.9(SOT-23) PKG |
| Rail-to-Rail | No |
| Rating | Catalog |
| Slew Rate(Typ) | 2675 V/us |
| Total Supply Voltage(Max) | 13 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 7 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 6.1 nV/rtHz |
| Vn at Flatband(Typ) | 6.1 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 5 mV |
Eco Plan
| RoHS | Compliant |
Design Kits & Evaluation Modules
- Evaluation Modules & Boards: OPA653EVM
OPA653EVM Evaluation Module
Lifecycle Status: Active (Recommended for new designs)
Application Notes
- Noise Analysis for High Speed Op Amps (Rev. A)PDF, 256 Kb, Revision: A, File published: Jan 17, 2005
As system bandwidths have increased an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not however particularly comfortable with the calculations required to predict the total noise for an op amp or in the conversions between the different descriptions of noise. Considerable inconsistency between manufactu
Model Line
Series: OPA653 (3)
- OPA653IDBVR OPA653IDBVT OPA653IDRBT
Manufacturer's Classification
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)
