Datasheet Texas Instruments TPS61140DRCT
| Manufacturer | Texas Instruments |
| Series | TPS61140 |
| Part Number | TPS61140DRCT |
Dual, 2x 27V, 700mA Switch, 1.2MHz Boost Converter with Single Inductor White LED and OLED Driver 10-VSON -40 to 85
Datasheets
Dual Output Boost Regulator Using SIngle Inductor datasheet
PDF, 1.2 Mb, Revision: B, File published: Mar 22, 2007
Extract from the document
Prices
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
Packaging
| Pin | 10 |
| Package Type | DRC |
| Industry STD Term | VSON |
| JEDEC Code | S-PDSO-N |
| Package QTY | 250 |
| Carrier | SMALL T&R |
| Device Marking | BCP |
| Width (mm) | 3 |
| Length (mm) | 3 |
| Thickness (mm) | .9 |
| Pitch (mm) | .5 |
| Max Height (mm) | 1 |
| Mechanical Data | Download |
Parametrics
| Number of Channels | 2 |
| Duty Cycle(Max) | 93 % |
| LED | 1 OLED + 4 |
| LED Current Per Channel | 23 mA |
| Operating Temperature Range | -40 to 85 C |
| Package Group | VSON |
| Package Size: mm2:W x L | 10VSON: 9 mm2: 3 x 3(VSON) PKG |
| Peak Efficiency | 85 % |
| Rating | Catalog |
| Shutdown Current(Typ) | 1.5 uA |
| Special Features | Synchronous Rectification |
| Switching Frequency(Max) | 1200 kHz |
| Topology | Boost |
| Type | Inductive |
| Vin(Max) | 6 V |
| Vin(Min) | 3 V |
| Vout(Max) | 27 V |
| Vout(Min) | 2.5 V |
Eco Plan
| RoHS | Compliant |
Design Kits & Evaluation Modules
- Evaluation Modules & Boards: TPS61140EVM-157
TPS61140EVM Evaluation Module
Lifecycle Status: Active (Recommended for new designs)
Application Notes
- Clamshell Phone w/OLED/LCD Screen Using the TPS61140 Dial Output Boost RegulatorPDF, 49 Kb, File published: Jul 6, 2006
The TPS61140/1 is a dual output boost converter providing regulated voltage and current output with one boost converter. The reference design and application example shown in this document can be used to power a clamshell phone with an organic light-emitting diode (OLED) and a LCD screen. This device is ideal for driving the OLED sub display and WLED backlight for the LCD main display in clamshell - Minimizing Ringing at the Switch Node of a Boost ConverterPDF, 201 Kb, File published: Sep 15, 2006
The application report explains how to use proper board layout and/or a snubber to reduce high-frequency ringing at the switch node of a boost converter. - Optimizing Transient Response of Internally Compensated DC-DC Converters (Rev. A)PDF, 1.1 Mb, Revision: A, File published: May 11, 2015
- Extending the Soft Start Time Without a Soft Start Pin (Rev. B)PDF, 387 Kb, Revision: B, File published: Jun 15, 2017
- IQ: What it is what it isn’t and how to use itPDF, 198 Kb, File published: Jun 17, 2011
- Performing Accurate PFM Mode Efficiency Measurements (Rev. A)PDF, 418 Kb, Revision: A, File published: Dec 11, 2018
When performing measurements on DC-DC converters using pulse frequency modulation(PFM)or any power save mode proper care must be taken to ensure that the measurements are accurate. An accurate PFM mode efficiency measurement is critical for systems which require high efficiency at low loads such as in smart home systems tablets wearables and metering.
Model Line
Series: TPS61140 (5)
- HPA00234DRCRG4 TPS61140DRCR TPS61140DRCRG4 TPS61140DRCT TPS61140DRCTG4
Manufacturer's Classification
- Semiconductors > Power Management > LED Driver > Backlight LED Driver
