Datasheet Texas Instruments TL494CJ
Manufacturer | Texas Instruments |
Series | TL494 |
Part Number | TL494CJ |
PWM Control Circuit 16-CDIP
Datasheets
TL494 Pulse-Width-Modulation Control Circuits datasheet
PDF, 1.3 Mb, Revision: H, File published: Feb 27, 2017
Extract from the document
Prices
Status
Lifecycle Status | Obsolete (Manufacturer has discontinued the production of the device) |
Manufacture's Sample Availability | No |
Packaging
Pin | 16 |
Package Type | J |
Industry STD Term | CDIP |
JEDEC Code | R-GDIP-T |
Width (mm) | 6.92 |
Length (mm) | 19.56 |
Thickness (mm) | 4.57 |
Pitch (mm) | 2.54 |
Max Height (mm) | 5.08 |
Mechanical Data | Download |
Parametrics
Approx. Price (US$) | 0.17 | 1ku |
Control Method | Voltage |
Duty Cycle(Max)(%) | 45 |
Frequency(Max)(kHz) | 300 |
Operating Temperature Range(C) | -40 to 85 0 to 70 |
Package Group | PDIP SO SOIC TSSOP |
Rating | Catalog |
Special Features | Adjustable Switching Frequency Error Amplifier Multi-topology |
Topology | Boost Buck Flyback Forward Full-Bridge Half-Bridge Push-Pull |
Vin(Max)(V) | 40 |
Vin(Min)(V) | 7 |
Eco Plan
RoHS | Not Compliant |
Pb Free | No |
Application Notes
- Isolated Multiple Output Flyback Converter Design Using TL494PDF, 741 Kb, File published: Jun 18, 2014
- Off-Line SMPS Failure Modes PWM Switchers and DC-DC ConvertersPDF, 71 Kb, File published: Mar 22, 2000
Today's voltage regulator modules (VRMs) employ off-line SMPS techniques. Traditionally, they are usually discarded when they fail because they are so challenging to debug and so inexpensive to replace. Investigation of these failed modules reveals some common failure modes. Some failures are caused by other systems' passive components that fail after repeated electrical stress. Recognizing these - Designing Switching Voltage Regulators With the TL494 (Rev. E)PDF, 329 Kb, Revision: E, File published: Jul 26, 2005
Designing Switching Voltage Regulators With the TL494 - Understanding Buck Power Stages In Switchmode Power SuppliesPDF, 173 Kb, File published: Mar 4, 1999
A switching power supply consists of the power stage and the control circuit. The power stage performs the basic power conversion from the input voltage to the output voltage and includes switches and the output filter. This report addresses the buck power stage only and does not cover control circuits. Detailed steady-state and small-signal analysis of the buck power stage operating in continuous - Understanding Boost Power Stages In Switchmode Power SuppliesPDF, 149 Kb, File published: Mar 4, 1999
A switching power supply consists of the power stage and the control circuit. The power stage performs the basic power conversion from the input voltage to the output voltage and includes switches and the output filter. This report addresses the boost power stage only and does not cover control circuits. The report includes detailed steady-stage and small-signal analysis of the boost power stage o - Understanding Buck-Boost Power Stages in Switchmode Power Supplies (Rev. A)PDF, 363 Kb, Revision: A, File published: May 28, 2002
Model Line
Series: TL494 (25)
Manufacturer's Classification
- Semiconductors > Power Management > Offline and Isolated DC/DC Controllers and Converters > PWM and Resonant Controller