Datasheet Texas Instruments TPS54618RTET

2.95V to 6V Input, 6A, Synchronous Step-Down SWIFT™ Converter 16-WQFN -40 to 150

Datasheets

PDF, 1.7 Mb, Revision: E, File published: Nov 25, 2014

Extract from the document

Lifecycle Status	Active (Recommended for new designs)
Manufacture's Sample Availability	Yes

Control Mode	Current Mode
Duty Cycle(Max)	98 %
Iout(Max)	6 A
Iq(Typ)	0.25 mA
Operating Temperature Range	-40 to 150 C
Package Group	WQFN
Rating	Catalog
Regulated Outputs	1
Special Features	Enable,Frequency Synchronization,Power Good,Pre-Bias Start-Up,Synchronous Rectification,Tracking,UVLO Adjustable
Switching Frequency(Max)	2000 kHz
Switching Frequency(Min)	200 kHz
Type	Converter
Vin(Max)	6 V
Vin(Min)	2.95 V
Vout(Max)	4.5 V
Vout(Min)	0.8 V

RoHS

Compliant

Evaluation Modules & Boards: TPS54618EVM-606
Evaluation Module for TPS54618 Synchronous Step-Down SWIFTВ™ DC/DC Converter
Lifecycle Status: Active (Recommended for new designs)
- Download

Download
Calculating Efficiency
PDF, 175 Kb, File published: Feb 19, 2010
This application report provides a step-by-step procedure for calculating buck converter efficiency and power dissipation at operating points not provided by the data sheet.
Download
Designing Type III Compensation for Current Mode Step-Down Converters (Rev. A)
PDF, 298 Kb, Revision: A, File published: Sep 15, 2010
One of the well-known benefits of current-mode control is that the system stability can be easily achieved by Type II compensation design. It is possible to improve the transient response of a current mode DC/DC converter by adopting Type III compensation to boost the crossover frequency and phase margin. Type III compensation is simple to design and needs only one extra component.
Download
Intel VR11.1 Server Reference Design
PDF, 38 Kb, File published: Jul 21, 2010
Download
Understanding Thermal Dissipation and Design of a Heatsink
PDF, 59 Kb, File published: May 4, 2011
Power dissipation performance must be well understood prior to integrating devices on a printed-circuit board (PCB) to ensure that any given device is operated within its defined temperature limits. When a device is running, it consumes electrical energy that is transformed into heat. Most of the heat is typically generated by switching devices like MOSFETs, ICs, etc. This application report discu
Download
Semiconductor and IC Package Thermal Metrics (Rev. C)
PDF, 201 Kb, Revision: C, File published: Apr 19, 2016

Series: TPS54618 (2)

Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Step-Down (Buck) > Buck Converter (Integrated Switch)