Datasheet Texas Instruments LM5007MM
| Manufacturer | Texas Instruments |
| Series | LM5007 |
| Part Number | LM5007MM |
9-75V Wide Vin, 500mA Constant On-Time Non-Synchronous Buck Regulator 8-VSSOP -40 to 125
Datasheets
LM5007 High Voltage 80-V Step Down Switching Regulator datasheet
PDF, 1.1 Mb, Revision: G, File published: Nov 30, 2015
Extract from the document
Prices
Status
| Lifecycle Status | NRND (Not recommended for new designs) |
| Manufacture's Sample Availability | No |
Packaging
| Pin | 8 |
| Package Type | DGK |
| Industry STD Term | VSSOP |
| JEDEC Code | R-PDSO-G |
| Package QTY | 1000 |
| Carrier | SMALL T&R |
| Device Marking | S81B |
| Width (mm) | 3 |
| Length (mm) | 3 |
| Thickness (mm) | .97 |
| Pitch (mm) | .65 |
| Max Height (mm) | 1.07 |
| Mechanical Data | Download |
Replacements
| Replacement | LM5007MM/NOPB |
| Replacement Code | S |
Parametrics
| Control Mode | Constant on-time (COT) |
| Duty Cycle(Max) | 99 % |
| Iout(Max) | 0.5 A |
| Iq(Typ) | 0.5 mA |
| Operating Temperature Range | -40 to 125 C |
| Package Group | VSSOP |
| Rating | Catalog |
| Regulated Outputs | 1 |
| Special Features | Enable |
| Switching Frequency(Max) | 800 kHz |
| Switching Frequency(Min) | 50 kHz |
| Type | Converter |
| Vin(Max) | 75 V |
| Vin(Min) | 9 V |
| Vout(Max) | 73 V |
| Vout(Min) | 2.5 V |
Eco Plan
| RoHS | See ti.com |
Design Kits & Evaluation Modules
- Evaluation Modules & Boards: LM5007EVAL
80V Wide Vin Step Down Switching Regulator Evaluation Board
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: LM5007SD-EVAL
High Voltage (80V) Step Down Switching Regulator
Lifecycle Status: Active (Recommended for new designs)
Application Notes
- Starting Up A Buck Regulator With a Voltage Present At V OUT (Rev. A)PDF, 31 Kb, Revision: A, File published: Apr 30, 2013
This application report describes a buck regulator’s inability to startup when there is a voltage alreadypresent at the regulator’s output (VOUT). Although the LM5007 is used in this application report, the samediscussion applies to the LM50xx and LM349xx series of buck regulators. - Analysis & Design of Hysteretic Constant Freq Buck Regr Using the LM5007 (Rev. B)PDF, 403 Kb, Revision: B, File published: Apr 30, 2013
This application report describes the operation of the LM5007, and provides a step-by-step procedure forselecting the external components. - Controlling Output Ripple & Achiev ESR Indep Constant On-Time Reg Designs (Rev. A)PDF, 178 Kb, Revision: A, File published: Apr 23, 2013
Of all the voltage regulator control strategies ever devised, the hysteretic regulator is probably about thesimplest. This control methodology simply turns a switch on when the output voltage is below a referenceand turns the switch off when the output rises to a slightly higher reference. The output ripple is thereforea direct function of the difference between the upper and lower reference
Model Line
Series: LM5007 (6)
Manufacturer's Classification
- Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Step-Down (Buck) > Buck Converter (Integrated Switch)
