Datasheet Texas Instruments TPS54010PWPRG4

ManufacturerTexas Instruments
SeriesTPS54010
Part NumberTPS54010PWPRG4
Datasheet Texas Instruments TPS54010PWPRG4

3V to 4V Input, 14A Synchronous Step-Down Converter 28-HTSSOP -40 to 85

Datasheets

2.2 -4 -V, 14A Output Synchronous Buck PWM Switcher w/Integrated FETs datasheet
PDF, 1.1 Mb, Revision: B, File published: Jun 8, 2005
Extract from the document

Prices

Status

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityNo

Packaging

Pin28
Package TypePWP
Industry STD TermHTSSOP
JEDEC CodeR-PDSO-G
Package QTY2000
CarrierLARGE T&R
Device MarkingTPS54010
Width (mm)4.4
Length (mm)9.7
Thickness (mm)1
Pitch (mm).65
Max Height (mm)1.2
Mechanical DataDownload

Parametrics

Control ModeVoltage Mode
Duty Cycle(Max)90 %
Iout(Max)14 A
Iq(Typ)13 mA
Operating Temperature Range-40 to 85 C
Package GroupHTSSOP
RatingCatalog
Regulated Outputs1
Special FeaturesEnable,Frequency Synchronization,Power Good,Synchronous Rectification
Switching Frequency(Max)700 kHz
Switching Frequency(Min)280 kHz
TypeConverter
Vin(Max)4 V
Vin(Min)2.2 V
Vout(Max)2.5 V
Vout(Min)0.9 V

Eco Plan

RoHSCompliant

Design Kits & Evaluation Modules

  • Evaluation Modules & Boards: TPS54010EVM-067
    14-A, 2.2-4.0 Vin DC/DC Converter with Adjustable Output Voltage Evaluation Module
    Lifecycle Status: Active (Recommended for new designs)

Application Notes

  • Dual Output Power Supply Sequencing for High Performance Processors
    PDF, 6.0 Mb, File published: Jul 17, 2002
    Dual voltage power supply architectures are becoming commonplace in high performance microprocessor and digital signal processor (DSP) systems. To save power and increase processing speeds, processor cores have smaller geometry cells and require lower supply voltages than the system bus voltages. Power management in these systems requires special attention. Yesterday's power management ICs and app
  • Thermal Performance of SWIFT(TM) DC/DC Converters in the 28-Pin HTSSOP Package
    PDF, 267 Kb, File published: Feb 4, 2005
    The thermal management of printed-circuit boards is complex, but must be well understood to achieve optimum performance and reliability. SWIFT(TM) dc/dc converters in the 28-pin HTSSOP package rely on an exposed lead frame die pad [PowerPAD(TM)] on the bottom of the package to provide an extremely low thermal resistance from junction to case. The thermal performance of the 6-, 9-, and 14-A SWIFT d
  • Using Low Voltage SWIFT DC/DC Converters with Ceramic Capacitors
    PDF, 490 Kb, File published: Jan 8, 2003
    This application note investigates an adequate phase margin for stable operation of SWIFTв„ў regulators with the ceramic capacitors at worst-case tolerances of regulator and external parts. TI also shows how the bandwidth and gain of feedback loop impact on load-current transient-response characteristics. Measurements and analysis have shown that the voltage-mode control SWIFTв„ў regulat

Model Line

Series: TPS54010 (4)

Manufacturer's Classification

  • Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Step-Down (Buck) > Buck Converter (Integrated Switch)