Datasheet Texas Instruments LM318M

Operational Amplifier 8-SOIC 0 to 70

Datasheets

PDF, 1.6 Mb, Revision: C, File published: Mar 20, 2013

Extract from the document

Lifecycle Status	NRND (Not recommended for new designs)
Manufacture's Sample Availability	No

Replacement	LM318M/NOPB
Replacement Code	S

Additional Features	N/A
Architecture	Bipolar
CMRR(Min)	70 dB
CMRR(Typ)	100 dB
GBW(Typ)	15 MHz
Input Bias Current(Max)	500000 pA
Iq per channel(Max)	10 mA
Iq per channel(Typ)	4.5 mA
Number of Channels	1
Offset Drift(Typ)	6 uV/C
Operating Temperature Range	0 to 70 C
Output Current(Typ)	20 mA
Package Group	SOIC
Package Size: mm2:W x L	8SOIC: 29 mm2: 6 x 4.9(SOIC) PKG
Rail-to-Rail	No
Rating	Catalog
Slew Rate(Typ)	70 V/us
Total Supply Voltage(Max)	40 +5V=5, +/-5V=10
Total Supply Voltage(Min)	10 +5V=5, +/-5V=10
Vn at 1kHz(Typ)	15 nV/rtHz
Vos (Offset Voltage @ 25C)(Max)	10 mV

RoHS	See ti.com

Download
Instrumentational Amplifiers (See also LMP8358)
PDF, 76 Kb, File published: Oct 2, 2002
Download
AN-446 A 150W IC Op Amp Simplifies Design of Power Circuits
PDF, 782 Kb, File published: May 10, 2004
Application Note 446 A 150W IC Op Amp Simplifies Design of Power Circuits
Download
Building an Op Amp With Bipolar Transistors, A Historical Application Note (Rev. A)
PDF, 1.2 Mb, Revision: A, File published: Sep 19, 2016
It is well known that the voltage noise of an operational amplifier can be decreased by increasing the emitter currentof the input stage. The signal-to-noise ratio will be improved by the increase of bias, until the base current noise begins to dominate.
Download
Effect of Heavy Loads on Accuracy and Linearity of Op Amp Circuits (Rev. B)
PDF, 81.7 Mb, Revision: B, File published: Apr 22, 2013
This application report discusses the effect of heavy loads on the accuracy and linearity of operationalamplifier circuits.

Series: LM318-N (4)

Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > General-Purpose Op Amps