Datasheet Texas Instruments SN74LVC00ADT

ManufacturerTexas Instruments
SeriesSN74LVC00A
Part NumberSN74LVC00ADT
Datasheet Texas Instruments SN74LVC00ADT

Quadruple 2-Input Positive-NAND Gate 14-SOIC -40 to 125

Datasheets

SNx4LVC00A Quadruple 2-Input Positive-NAND Gates datasheet
PDF, 1.4 Mb, Revision: R, File published: Feb 3, 2016
Extract from the document

Prices

Status

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityNo

Packaging

Pin14
Package TypeD
Industry STD TermSOIC
JEDEC CodeR-PDSO-G
Package QTY250
CarrierSMALL T&R
Device MarkingLVC00A
Width (mm)3.91
Length (mm)8.65
Thickness (mm)1.58
Pitch (mm)1.27
Max Height (mm)1.75
Mechanical DataDownload

Parametrics

Bits4
F @ Nom Voltage(Max)150 Mhz
ICC @ Nom Voltage(Max)0.04 mA
Operating Temperature Range-40 to 125 C
Output Drive (IOL/IOH)(Max)24/-24 mA
Package GroupSOIC
Package Size: mm2:W x L14SOIC: 52 mm2: 6 x 8.65(SOIC) PKG
RatingCatalog
Schmitt TriggerNo
Technology FamilyLVC
VCC(Max)3.6 V
VCC(Min)1.65 V
Voltage(Nom)1.8,2.5,2.7,3.3 V
tpd @ Nom Voltage(Max)12.5,6.4,5.1,4.3 ns

Eco Plan

RoHSCompliant

Application Notes

  • LVC Characterization Information
    PDF, 114 Kb, File published: Dec 1, 1996
    This document provides characterization information about low-voltage logic (LVL) that operates from a 3.3-V power supply. It addresses the issues of interfacing to 5-V logic ac performance power considerations input and output characteristics and signal integrity for this family of devices.
  • Use of the CMOS Unbuffered Inverter in Oscillator Circuits
    PDF, 796 Kb, File published: Nov 6, 2003
    CMOS devices have a high input impedance high gain and high bandwidth. These characteristics are similar to ideal amplifier characteristics and hence a CMOS buffer or inverter can be used in an oscillator circuit in conjunction with other passive components. Now CMOS oscillator circuits are widely used in high-speed applications because they are economical easy to use and take significantly
  • Power-Up 3-State (PU3S) Circuits in TI Standard Logic Devices
    PDF, 209 Kb, File published: May 10, 2002
    Many telecom and networking applications require that cards be inserted and extracted from a live backplane without interrupting data or damaging components. To achieve this interface terminals of the card must be electrically isolated from the bus system during insertion or extraction from the backplane. To facilitate this Texas Instruments provides bus-interface and logic devices with features

Model Line

Manufacturer's Classification

  • Semiconductors > Logic > Gate > NAND Gate