Datasheet Texas Instruments TPA2016D2RTJT
| Manufacturer | Texas Instruments |
| Series | TPA2016D2 |
| Part Number | TPA2016D2RTJT |
2.8-W/Ch Stereo Class-D Audio Amplifier with SmartGainTM AGC/DRC (TPA2016) 20-QFN -40 to 85
Datasheets
TPA2016D2 2.8-W/Ch Stereo Class-D Audio Amplifier With Dynamic Range Compression and Automatic Gain Control datasheet
PDF, 1.4 Mb, Revision: E, File published: May 31, 2016
Extract from the document
Prices
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No |
Packaging
| Pin | 20 | 20 |
| Package Type | RTJ | RTJ |
| Industry STD Term | WQFN | WQFN |
| JEDEC Code | S-PQFP-N | S-PQFP-N |
| Package QTY | 250 | 250 |
| Carrier | SMALL T&R | SMALL T&R |
| Device Marking | 2016D2 | TPA |
| Width (mm) | 4 | 4 |
| Length (mm) | 4 | 4 |
| Thickness (mm) | .73 | .73 |
| Pitch (mm) | .5 | .5 |
| Max Height (mm) | .8 | .8 |
| Mechanical Data | Download | Download |
Parametrics
| Analog Supply (V) | 5.5 Min |
| Architecture | Class D |
| Audio Input Type | Analog Input |
| Control Interface | I2C |
| Iq per channel(Typ) | 2.25 mA |
| Iq(Max) | 5.5 mA |
| Iq(Typ) | 4.5 mA |
| Load(Min) | 4 ohms |
| Operating Temperature Range | -40 to 85 C |
| Output Power | 2.8 W |
| PSRR | 80 dB |
| Package Group | QFN |
| Package Size: mm2:W x L | 20QFN: 16 mm2: 4 x 4(QFN) PKG |
| Pin/Package | 16DSBGA, 20QFN |
| Rating | Catalog |
| Shutdown Current (ISD) | 0.2 uA |
| Speaker Channels | Stereo Max |
| THD + N @ 1 kHz | 1 % |
Eco Plan
| RoHS | Compliant |
Design Kits & Evaluation Modules
- Evaluation Modules & Boards: TPA2016D2EVM
TPA2016D2 Evaluation Module (EVM)
Lifecycle Status: Active (Recommended for new designs)
Application Notes
- TPA2016D2 Input FilteringPDF, 141 Kb, File published: Jul 15, 2008
- Filter-Free Class-D Audio AmplifiersPDF, 259 Kb, File published: Nov 9, 2009
Traditional Class-D amplifiers lose efficiency if they do not use output LC filters. Texas Instruments offers many Class-D amplifiers that are designated Filter-Free. This means they do not require an output LC filter to maintain high efficiency. However, in some cases an LC or ferrite bead filter is required for EMC. - AN-1737 Managing EMI in Class D Audio Applications (Rev. A)PDF, 140 Kb, Revision: A, File published: May 1, 2013
Electromagnetic interference (EMI) is an unwanted disturbance caused in an electrical circuit byelectromagnetic radiation emitted from an external source. The disturbance may interrupt, obstruct, orotherwise degrade the effective performance of the circuit. - AN-1849 An Audio Amplifier Power Supply Design (Rev. B)PDF, 1.9 Mb, Revision: B, File published: May 1, 2013
This application report provides design information for a power supply for use with our newest offering of high-performance, ultra high-fidelity audio amplifier input stage ICs. - Guidelines for Measuring Audio Power Amplifier PerformancePDF, 765 Kb, File published: Oct 30, 2001
This application note provides guidelines for measuring the date sheet parameters of Texas Instruments audio power amplifiers (APAs) using prefabricated evaluation modules (EVMs). The primary equipment used for the measurements consists of the System Two audio measurement system by Audio Precision , a digital multimeter (DMM), and a dc power supply.
Model Line
Series: TPA2016D2 (5)
- HPA00773YZHR TPA2016D2RTJR TPA2016D2RTJT TPA2016D2YZHR TPA2016D2YZHT
Manufacturer's Classification
- Semiconductors > Audio > Low-Power Audio Amplifiers (<10W) > Speaker Amplifier Class AB/Class D
