Datasheet Texas Instruments SN74ALVCH16543DL

Manufacturer	Texas Instruments
Series	SN74ALVCH16543
Part Number	SN74ALVCH16543DL

16-Bit Registered Transceiver With 3-State Outputs 56-SSOP -40 to 85

Datasheets

Download

PDF, 350 Kb, Revision: E, File published: Aug 27, 2004

Extract from the document

Prices

Status

Lifecycle Status	Active (Recommended for new designs)
Manufacture's Sample Availability	No

Packaging

Pin	56
Package Type	DL
Industry STD Term	SSOP
JEDEC Code	R-PDSO-G
Package QTY	20
Carrier	TUBE
Device Marking	ALVCH16543
Width (mm)	7.49
Length (mm)	18.41
Thickness (mm)	2.59
Pitch (mm)	.635
Max Height (mm)	2.79
Mechanical Data	Download

Parametrics

Bits	16
F @ Nom Voltage(Max)	150 Mhz
ICC @ Nom Voltage(Max)	0.04 mA
Operating Temperature Range	-40 to 85 C
Output Drive (IOL/IOH)(Max)	-24/24 mA
Package Group	SSOP
Package Size: mm2:W x L	56SSOP: 191 mm2: 10.35 x 18.42(SSOP) PKG
Rating	Catalog
Schmitt Trigger	No
Technology Family	ALVC
VCC(Max)	3.6 V
VCC(Min)	1.65 V
Voltage(Nom)	1.8,2.5,2.7,3.3 V
tpd @ Nom Voltage(Max)	5.1,4.8,4.3 ns

Eco Plan

RoHS

Compliant

Application Notes

Download
TI SN74ALVC16835 Component Specification Analysis for PC100
PDF, 43 Kb, File published: Aug 3, 1998
The PC100 standard establishes design parameters for the PC SDRAM DIMM that is designed to operate at 100 MHz. The 168-pin, 8-byte, registered SDRAM DIMM is a JEDEC-defined device (JC-42.5-96-146A). Some of the defined signal paths include data signals, address signals, and control signals. This application report discusses the SN74ALVC16835 18-bit universal bus driver that is available from T
Download
Logic Solutions for PC-100 SDRAM Registered DIMMs (Rev. A)
PDF, 96 Kb, Revision: A, File published: May 13, 1998
Design of high-performance personal computer (PC) systems that are capable of meeting the needs imposed by modern operating systems and software includes the use of large banks of SDRAMs on DIMMs (see Figure 1).To meet the demands of stable functionality over the broad spectrum of operating environments, meet system timing needs, and to support data integrity, the loads presented by the large
Download
Bus-Hold Circuit
PDF, 418 Kb, File published: Feb 5, 2001
When designing systems that include CMOS devices, designers must pay special attention to the operating condition in which all of the bus drivers are in an inactive, high-impedance condition (3-state). Unless special measures are taken, this condition can lead to undefined levels and, thus, to a significant increase in the device?s power dissipation. In extreme cases, this leads to oscillation of
Download
16-Bit Widebus Logic Families in 56-Ball 0.65-mm Pitch Very Thin Fine-Pitch BGA (Rev. B)
PDF, 895 Kb, Revision: B, File published: May 22, 2002
TI?s 56-ball MicroStar Jr.E package registered under JEDEC MO-225 has demonstrated through modeling and experimentation that it is an optimal solution for reducing inductance and capacitance improving thermal performance and minimizing board area usage in integrated bus functions. Multiple functions released in the 56-ball MicroStar Jr.E package have superior performance characteristics compa
Download
Benefits & Issues of Migrating 5-V and 3.3-V Logic to Lower-Voltage Supplies (Rev. A)
PDF, 154 Kb, Revision: A, File published: Sep 8, 1999
In the last few years the trend toward reducing supply voltage (VCC) has continued as reflected in an additional specification of 2.5-V VCC for the AVC ALVT ALVC LVC LV and the CBTLV families.In this application report the different logic levels at VCC of 5 V 3.3 V 2.5 V and 1.8 V are compared. Within the report the possibilities for migration from 5-V logic and 3.3-V logic families

Model Line

Series: SN74ALVCH16543 (3)

SN74ALVCH16543DGGR SN74ALVCH16543DL SN74ALVCH16543DLR

Manufacturer's Classification

Semiconductors > Logic > Buffer/Driver/Transceiver > Registered Transceiver