Datasheet Texas Instruments TPS61240YFFT

ManufacturerTexas Instruments
SeriesTPS61240
Part NumberTPS61240YFFT
Datasheet Texas Instruments TPS61240YFFT

5V, 400mA, 4MHz Step-Up DC/DC Converter 6-DSBGA -40 to 85

Datasheets

TPS6124x 3.5-MHz High Efficiency Step-Up Converter datasheet
PDF, 1.1 Mb, Revision: D, File published: Dec 15, 2015
Extract from the document

Prices

Status

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityNo

Packaging

Pin6
Package TypeYFF
Industry STD TermDSBGA
JEDEC CodeR-XBGA-N
Package QTY250
CarrierSMALL T&R
Device MarkingGM
Thickness (mm).535
Pitch (mm).4
Max Height (mm).625
Mechanical DataDownload

Parametrics

Duty Cycle(Max)100 %
Iq(Typ)0.03 mA
Operating Temperature Range-40 to 85 C
Package GroupDSBGA
RatingCatalog
Regulated Outputs1
Special FeaturesEnable,Light Load Efficiency,Load Disconnect
Switch Current Limit(Min)0.5 A
Switch Current Limit(Typ)0.6 A
Switching Frequency(Max)3500 kHz
Switching Frequency(Min)3500 kHz
TypeConverter
Vin(Max)5.5 V
Vin(Min)2.3 V
Vout(Max)5 V
Vout(Min)5 V

Eco Plan

RoHSCompliant

Design Kits & Evaluation Modules

  • Evaluation Modules & Boards: DP159RSBEVM
    DP159RSBEVM Evaluation Module
    Lifecycle Status: Active (Recommended for new designs)
  • Evaluation Modules & Boards: TPS61240EVM-360
    TPS61240EVM-360 Evaluation Module
    Lifecycle Status: Active (Recommended for new designs)
  • Evaluation Modules & Boards: MMWAVE-DEVPACK
    mmWave Development Pack (DevPack)
    Lifecycle Status: Active (Recommended for new designs)
  • Evaluation Modules & Boards: DP149RSBEVM
    DP149 3.4 Gbps DP++ to HDMI Retimer Evaluation Module
    Lifecycle Status: Active (Recommended for new designs)
  • Evaluation Modules & Boards: TMDS181RGZEVM
    TMDS181RGZ 6 Gbps TMDS Retimer Evaluation Module
    Lifecycle Status: Active (Recommended for new designs)
  • Evaluation Modules & Boards: TMDS171RGZEVM
    TMDS171RGZ 3.4 Gbps TMDS Retimer Evaluation Module
    Lifecycle Status: Active (Recommended for new designs)
  • Evaluation Modules & Boards: DP159RGZEVM
    DP159RGZEVM Evaluation Module
    Lifecycle Status: Active (Recommended for new designs)
  • Evaluation Modules & Boards: TDP158RSBEVM
    6 Gbps AC Coupled to TMDSВ™/HDMIВ™ Redriver Evaluation Module
    Lifecycle Status: Active (Recommended for new designs)

Application Notes

  • Design of UVLO for LM27313 (Rev. B)
    PDF, 142 Kb, Revision: B, File published: Apr 8, 2014
  • Five Steps to a Good PCB Layout of the Boost Converter
    PDF, 701 Kb, File published: May 3, 2016
  • Basic Calculation of a Boost Converter's Power Stage (Rev. C)
    PDF, 186 Kb, Revision: C, File published: Jan 8, 2014
    This application note gives the equations to calculate the power stage of a boost converter built with an IC with integrated switch and operating in continuous conduction mode. It is not intended to give details on the functionality of a boost converter (see Reference 1) or how to compensate a converter. See the references at the end of this document if more detail is needed.
  • Extending the Soft Start Time Without a Soft Start Pin (Rev. B)
    PDF, 387 Kb, Revision: B, File published: Jun 15, 2017
  • QFN and SON PCB Attachment (Rev. B)
    PDF, 821 Kb, Revision: B, File published: Aug 24, 2018
  • IQ: What it is what it isn’t and how to use it
    PDF, 198 Kb, File published: Jun 17, 2011
  • Performing Accurate PFM Mode Efficiency Measurements (Rev. A)
    PDF, 418 Kb, Revision: A, File published: Dec 11, 2018
    When performing measurements on DC-DC converters using pulse frequency modulation(PFM)or any power save mode proper care must be taken to ensure that the measurements are accurate. An accurate PFM mode efficiency measurement is critical for systems which require high efficiency at low loads such as in smart home systems tablets wearables and metering.

Model Line

Series: TPS61240 (4)

Manufacturer's Classification

  • Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Step-Up (Boost) > Boost Converter (Integrated Switch)