Datasheet Texas Instruments OPA337PA
| Manufacturer | Texas Instruments |
| Series | OPA337 |
| Part Number | OPA337PA |
MicroSIZE, Single-Supply CMOS Operational Amplifier MicroAmplifier™ Series 8-PDIP -40 to 85
Datasheets
MicroSIZE, Single-Supply CMOS Operational Amplifiers MicroAmplifier Series datasheet
PDF, 1.2 Mb, Revision: B, File published: Mar 9, 2005
Extract from the document
Prices
Status
| Lifecycle Status | Obsolete (Manufacturer has discontinued the production of the device) |
| Manufacture's Sample Availability | No |
Packaging
| Pin | 8 |
| Package Type | P |
| Industry STD Term | PDIP |
| JEDEC Code | R-PDIP-T |
| Carrier | TUBE |
| Device Marking | OPA337PA |
| Width (mm) | 6.35 |
| Length (mm) | 9.81 |
| Thickness (mm) | 3.9 |
| Pitch (mm) | 2.54 |
| Max Height (mm) | 5.08 |
| Mechanical Data | Download |
Parametrics
| Additional Features | N/A |
| Architecture | CMOS |
| CMRR(Min) | 74 dB |
| CMRR(Typ) | 90 dB |
| GBW(Typ) | 3 MHz |
| Input Bias Current(Max) | 10 pA |
| Iq per channel(Max) | 1 mA |
| Iq per channel(Typ) | 0.525 mA |
| Number of Channels | 1 |
| Offset Drift(Typ) | 2 uV/C |
| Operating Temperature Range | -40 to 85 C |
| Output Current(Typ) | 9 mA |
| Package Group | SOIC,SOT-23,VSSOP |
| Package Size: mm2:W x L | 8SOIC: 29 mm2: 6 x 4.9(SOIC),5SOT-23: 8 mm2: 2.8 x 2.9(SOT-23),8VSSOP: 15 mm2: 4.9 x 3(VSSOP) PKG |
| Rail-to-Rail | In to V-,Out |
| Rating | Catalog |
| Slew Rate(Typ) | 1.2 V/us |
| Total Supply Voltage(Max) | 5.5 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 2.7 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 26 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 3 mV |
Eco Plan
| RoHS | Not Compliant |
Application Notes
- Signal conditioning piezoelectric sensors (AAJ)PDF, 870 Kb, File published: Feb 15, 2010
- Precision Absolute Value CircuitsPDF, 100 Kb, File published: Oct 2, 2000
You can build a precision absolute value circuit using two op amps and two precision resistors. If you use an op amp and an IC difference amplifier no user supplied precision resistors or resistor adjustments are required. Circuits shown are suitable for precision split supply operation and for single-supply operation. When used with a rail-to-rail op amp the single supply circuit can approach a - Tuning in AmplifiersPDF, 44 Kb, File published: Oct 2, 2000
Have you ever had the experience of designing an analog gain block with an amplifier that is specified to be unity gain stable only to find that it is oscillating out of control in your circuit? Or have you ever replaced a stable voltage feedback amplifier with a current feedback amplifier to find that the current feedback amplifier immediately oscillates when placed in the amplifier socket? Oscil - Single-Supply Operation of Operational AmplifiersPDF, 77 Kb, File published: Oct 2, 2000
Operation of op amps from single supply voltages is useful when negative supply voltages are not available. Furthermore, certain applications using high voltage and high current op amps can derive important benefits from single supply operation. - Op Amp Performance AnalysisPDF, 76 Kb, File published: Oct 2, 2000
This bulletin reflects the analysis power gained through knowledge of an op amp circuit's feedback factor. Feedback dictates the performance of an op amp both in function and in quality. The major specifications of the amplifier descibe an open-loop device awaiting feedback direction of the end circuit's function. Just how well the amplifier performs the function reflects through the feedback inte
Model Line
Series: OPA337 (11)
Manufacturer's Classification
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > Precision Op Amps
