Datasheet Texas Instruments TPS61230DRCT
Manufacturer | Texas Instruments |
Series | TPS61230 |
Part Number | TPS61230DRCT |
High Efficiency Synchronous Boost Converter With 5-A Switch 10-VSON -40 to 85
Datasheets
TPS6123x High Efficiency Synchronous Step Up Converters with 5-A Switches datasheet
PDF, 1.3 Mb, Revision: C, File published: Oct 24, 2014
Extract from the document
Prices
Status
Lifecycle Status | Active (Recommended for new designs) |
Manufacture's Sample Availability | Yes |
Packaging
Pin | 10 |
Package Type | DRC |
Industry STD Term | VSON |
JEDEC Code | S-PDSO-N |
Package QTY | 250 |
Carrier | SMALL T&R |
Device Marking | SBK |
Width (mm) | 3 |
Length (mm) | 3 |
Thickness (mm) | .9 |
Pitch (mm) | .5 |
Max Height (mm) | 1 |
Mechanical Data | Download |
Parametrics
Duty Cycle(Max) | 90 % |
Iq(Typ) | 0.035 mA |
Operating Temperature Range | -40 to 85 C |
Package Group | VSON |
Rating | Catalog |
Regulated Outputs | 1 |
Special Features | Enable,Light Load Efficiency,Load Disconnect,Power Good,Synchronous Rectification |
Switch Current Limit(Min) | 4 A |
Switch Current Limit(Typ) | 5 A |
Switching Frequency(Max) | 2000 kHz |
Type | Converter |
Vin(Max) | 5.5 V |
Vin(Min) | 2.3 V |
Vout(Max) | 5.5 V |
Vout(Min) | 2.5 V |
Eco Plan
RoHS | Compliant |
Design Kits & Evaluation Modules
- Evaluation Modules & Boards: TPS61230EVM-089
TPS61230EVM-089 High Efficiency Synchronous Boost Converter With 5-A Switch Evaluation Module
Lifecycle Status: Active (Recommended for new designs)
Application Notes
- Five Steps to a Good PCB Layout of the Boost ConverterPDF, 701 Kb, File published: May 3, 2016
- Working With Boost ConvertersPDF, 159 Kb, File published: Jun 15, 2015
This brief note highlights some of the more common pitfalls when using boost regulators. These includemaximum achievable output current and voltage, short circuit behavior and basic layout issues. It isassumed that the reader is familiar with the basic operation of a boost regulator. - Design considerations for a resistive feedback divider in a DC/DC converterPDF, 393 Kb, File published: Apr 26, 2012
- Performing Accurate PFM Mode Efficiency Measurements (Rev. A)PDF, 418 Kb, Revision: A, File published: Dec 11, 2018
When performing measurements on DC-DC converters using pulse frequency modulation(PFM)or any power save mode proper care must be taken to ensure that the measurements are accurate. An accurate PFM mode efficiency measurement is critical for systems which require high efficiency at low loads such as in smart home systems tablets wearables and metering.
Model Line
Series: TPS61230 (2)
- TPS61230DRCR TPS61230DRCT
Manufacturer's Classification
- Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Step-Up (Boost) > Boost Converter (Integrated Switch)