Datasheet Texas Instruments TLC2652Q-8D
| Manufacturer | Texas Instruments |
| Series | TLC2652 |
| Part Number | TLC2652Q-8D |
Precision Chopper-Stabilized Operational Amplifier 8-SOIC -40 to 125
Datasheets
TLC2652, TLC2652A, TLC2652Y Advanced LinCMOS Precision Chopper-Stabilized Op Amp datasheet
PDF, 1.1 Mb, Revision: E, File published: Feb 9, 2005
Extract from the document
Prices
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
Packaging
| Pin | 8 |
| Package Type | D |
| Industry STD Term | SOIC |
| JEDEC Code | R-PDSO-G |
| Package QTY | 75 |
| Carrier | SMALL T&R |
| Device Marking | T2652Q |
| Width (mm) | 3.91 |
| Length (mm) | 4.9 |
| Thickness (mm) | 1.58 |
| Pitch (mm) | 1.27 |
| Max Height (mm) | 1.75 |
| Mechanical Data | Download |
Parametrics
| Additional Features | Zero Drift |
| Architecture | CMOS |
| CMRR(Min) | 120 dB |
| CMRR(Typ) | 140 dB |
| GBW(Typ) | 1.9 MHz |
| Input Bias Current(Max) | 60 pA |
| Iq per channel(Max) | 2.4 mA |
| Iq per channel(Typ) | 1.5 mA |
| Number of Channels | 1 |
| Offset Drift(Typ) | 0.01 uV/C |
| Operating Temperature Range | -40 to 125 C |
| Output Current(Typ) | 3 mA |
| Package Group | SOIC |
| Package Size: mm2:W x L | 8SOIC: 29 mm2: 6 x 4.9(SOIC) PKG |
| Rail-to-Rail | In to V-,Out |
| Rating | Catalog |
| Slew Rate(Typ) | 2.8 V/us |
| Total Supply Voltage(Max) | 16 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 3.8 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 23 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 0.003 mV |
Eco Plan
| RoHS | Compliant |
Application Notes
- AB-174: Getting the Full Potential from your ADC (Rev. A)PDF, 72 Kb, Revision: A, File published: Jun 28, 2002
Many of today?s high-resolution ADCs (Analog-to-Digital Converters) are operating from a single supply and use fully differential inputs. This can be a problem for single-ended signals that are bipolar relative to common. This article illustrates circuit configurations that preserve the full-scale input range by using modern features, such as Programmable Gain Amplifiers (PGAs) and internal voltag - Choosing an ADC and Op Amp for Minimum OffsetPDF, 72 Kb, File published: Oct 28, 1999
Designing a mixed-signal circuit containing analog and digital components can be a challenge to the development engineer. Requirements such as a low single-polarity supply voltage and a high degree of precision may conflict, and make the choice of components and the best circuit design difficult. This report discusses problems that arise in using operational amplifiers (op amps) for signal conditi
Model Line
Series: TLC2652 (13)
Manufacturer's Classification
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > Precision Op Amps
Other Names:
TLC2652Q8D, TLC2652Q 8D
