Datasheet Texas Instruments THS10064CDA

10-Bit, 6 MSPS ADC Quad Ch.

Datasheets

PDF, 504 Kb, Revision: B, File published: Dec 10, 2002

Extract from the document

(Config.), DSP/uP Interface, Integ. 16x FIFO, Ch. AutoScan, Low Power 32-TSSOP 0 to 70

Lifecycle Status	Active (Recommended for new designs)
Manufacture's Sample Availability	No

# Input Channels	4
Analog Voltage AVDD(Max)	5.25 V
Analog Voltage AVDD(Min)	4.75 V
Architecture	Pipeline
Digital Supply(Max)	5.25 V
Digital Supply(Min)	3 V
INL(Max)	1 +/-LSB
Input Range(Max)	4 V
Input Range(Min)	1.4 V
Input Type	Differential,Single-Ended
Integrated Features	N/A
Interface	Parallel
Multi-Channel Configuration	Multiplexed
Operating Temperature Range	-40 to 85,0 to 70 C
Package Group	TSSOP
Package Size: mm2:W x L	32TSSOP: 89 mm2: 8.1 x 11(TSSOP) PKG
Power Consumption(Typ)	186 mW
Rating	Catalog
Reference Mode	Ext,Int
Resolution	10 Bits
SINAD	59 dB
SNR	61 dB
Sample Rate (max)	6MSPS SPS
Sample Rate(Max)	6 MSPS
THD(Typ)	-64 dB

RoHS

Compliant

Download
Resetting Non-FIFO Variations of the 10-bit THS10064
PDF, 38 Kb, File published: May 9, 2002
The THS1007 and THS1009 are non-FIFO variations of the THS10064. They require some special procedures for properly resetting and configuring the device. This application brief explains the necessary steps required to get reliable data from these 10-bit, two and four channel simultaneous sampling data converters.
Download
Reading the Configuration Registers of the 10-bit THS10064, THS1007, THS10082
PDF, 39 Kb, File published: May 9, 2002
The THS10064, THS1007, THS10082, and the THS1009 are 10-bit variations of the THS1206. A useful feature of the THS1206 is the ability to read back the configuration register values for verification of the user configuration settings. While not specifically mentioned in the data sheets, these 10-bit parts provide similar debug functions.
Download
Noise Analysis for High Speed Op Amps (Rev. A)
PDF, 256 Kb, Revision: A, File published: Jan 17, 2005
As system bandwidths have increased an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not however particularly comfortable with the calculations required to predict the total noise for an op amp or in the conversions between the different descriptions of noise. Considerable inconsistency between manufactu

Series: THS10064 (5)

Semiconductors > Data Converters > Analog-to-Digital Converters (ADCs) > Precision ADCs (<=10MSPS)