Datasheet Texas Instruments LM5160QPWPTQ1
| Manufacturer | Texas Instruments |
| Series | LM5160-Q1 |
| Part Number | LM5160QPWPTQ1 |
Wide Input 65V, 1.5A Synchronous Buck / Fly-Buck™ Converter 14-HTSSOP -40 to 125
Datasheets
LM5160-Q1 Wide Input 65-V, 1.5-A Synchronous Buck / Fly-Buck Converter datasheet
PDF, 1.8 Mb, Revision: A, File published: Nov 10, 2015
Extract from the document
Prices
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No |
Packaging
| Pin | 14 | 14 |
| Package Type | PWP | PWP |
| Industry STD Term | HTSSOP | HTSSOP |
| JEDEC Code | R-PDSO-G | R-PDSO-G |
| Package QTY | 250 | 250 |
| Carrier | SMALL T&R | SMALL T&R |
| Device Marking | 5160 | QPWPQ1 |
| Width (mm) | 4.4 | 4.4 |
| Length (mm) | 5 | 5 |
| Thickness (mm) | 1 | 1 |
| Pitch (mm) | .65 | .65 |
| Max Height (mm) | 1.2 | 1.2 |
| Mechanical Data | Download | Download |
Parametrics
| Control Mode | Constant on-time (COT) |
| Duty Cycle(Max) | 92 % |
| Iout(Max) | 1.5 A |
| Iq(Typ) | 2.3 mA |
| Operating Temperature Range | -40 to 125 C |
| Package Group | HTSSOP |
| Rating | Automotive |
| Regulated Outputs | 1 |
| Special Features | Enable,Light Load Efficiency,Pre-Bias Start-Up,Synchronous Rectification,UVLO Adjustable |
| Switching Frequency(Max) | 1000 kHz |
| Switching Frequency(Min) | 50 kHz |
| Type | Converter |
| Vin(Max) | 65 V |
| Vin(Min) | 4.5 V |
| Vout(Max) | 60 V |
| Vout(Min) | 2 V |
Eco Plan
| RoHS | Compliant |
Design Kits & Evaluation Modules
- Evaluation Modules & Boards: LM5160DNTFBKEVM
LM5160DNTFBKEVM Fly-Buck Isolated Bias Supply Evaluation Board
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: LM5160DNTBKEVM
LM5160DNTBKEVM Wide Input 65V, 1.5A Synchronous Step-Down DC-DC Converter
Lifecycle Status: Active (Recommended for new designs)
Application Notes
- Is Your IGBT Gate-Driver Power Supply OptimizedPDF, 115 Kb, File published: Mar 12, 2015
Insulated Gate Bipolar Transistors (IGBTs) are used in high current three-phase AC motors. This application report discusses the theory and requirements of gate-drive power supply for IGBTs. It also discusses the isolation requirements and calculation of correct amount of IGBT drive power. - AN-2292 Designing an Isolated Buck (Fly-Buck) Converter (Rev. C)PDF, 870 Kb, Revision: C, File published: Dec 17, 2014
In many applications, one or more low-cost, simple to use, isolated power supplies working from input voltages up to 100 V are needed. Traditional solutions use flyback converters to generate this bias supply. Flyback designs typically utilize asymmetric transformers turns ratios for primary and secondary power windings, with an optocoupler and reference, or an auxiliary winding for feedback regul - Fly-Buck(TM) converter provides EMC and isolation in PLC applicationsPDF, 201 Kb, File published: Jan 29, 2015
Model Line
Series: LM5160-Q1 (3)
- LM5160QPWPQ1 LM5160QPWPRQ1 LM5160QPWPTQ1
Manufacturer's Classification
- Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Step-Down (Buck) > Buck Converter (Integrated Switch)
