Datasheet Texas Instruments ADS823E/1K
| Manufacturer | Texas Instruments |
| Series | ADS823 |
| Part Number | ADS823E/1K |
10-Bit, 60-MSPS Analog-to-Digital Converter (ADC) 28-SSOP -40 to 85
Datasheets
ADS823, ADS826: 10-Bit, 60MHz Sampling Analog-To-Digital Converter datasheet
PDF, 869 Kb, Revision: B, File published: Jun 28, 2002
Extract from the document
Prices
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No |
Packaging
| Pin | 28 |
| Package Type | DB |
| Industry STD Term | SSOP |
| JEDEC Code | R-PDSO-G |
| Package QTY | 1000 |
| Carrier | LARGE T&R |
| Device Marking | ADS823E |
| Width (mm) | 5.3 |
| Length (mm) | 10.2 |
| Thickness (mm) | 1.95 |
| Pitch (mm) | .65 |
| Max Height (mm) | 2 |
| Mechanical Data | Download |
Parametrics
| # Input Channels | 1 |
| Analog Input BW | 300 MHz |
| Architecture | Pipeline |
| DNL(Max) | 1 +/-LSB |
| DNL(Typ) | 0.25 +/-LSB |
| ENOB | 9.5 Bits |
| INL(Max) | 2 +/-LSB |
| INL(Typ) | 0.5 +/-LSB |
| Input Buffer | No |
| Input Range | 1,2 Vp-p |
| Interface | Parallel CMOS |
| Operating Temperature Range | -40 to 85 C |
| Package Group | SSOP |
| Package Size: mm2:W x L | 28SSOP: 80 mm2: 7.8 x 10.2(SSOP) PKG |
| Power Consumption(Typ) | 295 mW |
| Rating | Catalog |
| Reference Mode | Ext,Int |
| Resolution | 10 Bits |
| SFDR | 74 dB |
| SINAD | 59 dB |
| SNR | 60 dB |
| Sample Rate(Max) | 60 MSPS |
Eco Plan
| RoHS | Compliant |
Design Kits & Evaluation Modules
- Evaluation Modules & Boards: DEM-ADS82XE
DEM-ADS82XE Evaluation Fixture for the ADS822, ADS823, and ADS824
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: TSW2200EVM
TSW2200 Low-Cost Portable Power Supply Evaluation Module
Lifecycle Status: Active (Recommended for new designs)
Application Notes
- Analog-to-Digital Converter Grounding Practices Affect System Performance (Rev. A)PDF, 69 Kb, Revision: A, File published: May 18, 2015
- A Glossary of Analog-to-Digital Specifications and Performance Characteristics (Rev. B)PDF, 425 Kb, Revision: B, File published: Oct 9, 2011
This glossary is a collection of the definitions of Texas Instruments' Delta-Sigma (О”ОЈ), successive approximation register (SAR), and pipeline analog-to-digital (A/D) converter specifications and performance characteristics. Although there is a considerable amount of detail in this document, the product data sheet for a particular product specification is the best and final reference. - Driving High-Speed ADCs: Circuit Topologies and System-Level Parameters (Rev. A)PDF, 327 Kb, Revision: A, File published: Sep 10, 2010
This application report discusses the performance-related aspects of passive and active interfaces at the analog input of high-speed pipeline analog-to-digital converters (ADCs). The report simplifies the many possibilities into two main categories: passive and active interface circuits. The first section of the report gives an overview of equivalent models of buffered and unbuffered ADC input cir - CDCE72010 as a Clocking Solution for High-Speed Analog-to-Digital ConvertersPDF, 424 Kb, File published: Jun 8, 2008
Texas Instruments has recently introduced a family of devices suitable to meet the demands of high-speed high-IF sampling analog-to-digital converters (ADCs) such as the ADS5483 which is capable of sampling up to 135 MSPS. To realize the full potential of these high-performance devices the system must provide an extremely low phase noise clock source. The CDCE72010 clock synthesizer chip offers - ADS82x ADC with non-uniform sampling clockPDF, 234 Kb, File published: Feb 28, 2005
- Phase Noise Performance and Jitter Cleaning Ability of CDCE72010PDF, 2.3 Mb, File published: Jun 2, 2008
This application report presents phase noise data taken on the CDCE72010 jitter cleaner and synchronizer PLL device. The phase noise performance of the CDCE72010 depends on the phase noise of the reference clock VCXO clock and the CDCE72010 itself. This application report shows the phase noise performance at several of the most popular CDMA frequencies. This data helps the user to choose the rig - Principles of Data Acquisition and Conversion (Rev. A)PDF, 132 Kb, Revision: A, File published: Apr 16, 2015
- CDCE62005 as Clock Solution for High-Speed ADCsPDF, 805 Kb, File published: Sep 4, 2008
TI has introduced a family of devices well-suited to meet the demands for high-speed ADC devices such as the ADS5527 which is capable of sampling up to 210 MSPS. To realize the full potential of these high-performance products it is imperative to provide a low phase noise clock source. The CDCE62005 clock synthesizer chip offers a real-world clocking solution to meet these stringent requirements - Smart Selection of ADC/DAC Enables Better Design of Software-Defined RadioPDF, 376 Kb, File published: Apr 28, 2009
This application report explains different aspects of selecting analog-to-digital and digital-to-analog data converters for Software-Defined Radio (SDR) applications. It also explains how ADS61xx ADCs and the DAC5688 from Texas Instruments fit properly for SDR designs.
Model Line
Manufacturer's Classification
- Semiconductors > Data Converters > Analog-to-Digital Converters (ADCs) > High Speed ADCs (>10MSPS)
