Datasheet Texas Instruments TPS54010PWPR
Manufacturer | Texas Instruments |
Series | TPS54010 |
Part Number | TPS54010PWPR |
3V to 4V Input, 14A Synchronous Step-Down Converter 28-HTSSOP -40 to 85
Datasheets
2.2 -4 -V, 14A Output Synchronous Buck PWM Switcher w/Integrated FETs datasheet
PDF, 1.1 Mb, Revision: B, File published: Jun 8, 2005
Extract from the document
Prices
Status
Lifecycle Status | Active (Recommended for new designs) |
Manufacture's Sample Availability | No |
Packaging
Pin | 28 |
Package Type | PWP |
Industry STD Term | HTSSOP |
JEDEC Code | R-PDSO-G |
Package QTY | 2000 |
Carrier | LARGE T&R |
Device Marking | TPS54010 |
Width (mm) | 4.4 |
Length (mm) | 9.7 |
Thickness (mm) | 1 |
Pitch (mm) | .65 |
Max Height (mm) | 1.2 |
Mechanical Data | Download |
Parametrics
Control Mode | Voltage Mode |
Duty Cycle(Max) | 90 % |
Iout(Max) | 14 A |
Iq(Typ) | 13 mA |
Operating Temperature Range | -40 to 85 C |
Package Group | HTSSOP |
Rating | Catalog |
Regulated Outputs | 1 |
Special Features | Enable,Frequency Synchronization,Power Good,Synchronous Rectification |
Switching Frequency(Max) | 700 kHz |
Switching Frequency(Min) | 280 kHz |
Type | Converter |
Vin(Max) | 4 V |
Vin(Min) | 2.2 V |
Vout(Max) | 2.5 V |
Vout(Min) | 0.9 V |
Eco Plan
RoHS | Compliant |
Design Kits & Evaluation Modules
- Evaluation Modules & Boards: TPS54010EVM-067
14-A, 2.2-4.0 Vin DC/DC Converter with Adjustable Output Voltage Evaluation Module
Lifecycle Status: Active (Recommended for new designs)
Application Notes
- Dual Output Power Supply Sequencing for High Performance ProcessorsPDF, 6.0 Mb, File published: Jul 17, 2002
Dual voltage power supply architectures are becoming commonplace in high performance microprocessor and digital signal processor (DSP) systems. To save power and increase processing speeds, processor cores have smaller geometry cells and require lower supply voltages than the system bus voltages. Power management in these systems requires special attention. Yesterday's power management ICs and app - Thermal Performance of SWIFT(TM) DC/DC Converters in the 28-Pin HTSSOP PackagePDF, 267 Kb, File published: Feb 4, 2005
The thermal management of printed-circuit boards is complex, but must be well understood to achieve optimum performance and reliability. SWIFT(TM) dc/dc converters in the 28-pin HTSSOP package rely on an exposed lead frame die pad [PowerPAD(TM)] on the bottom of the package to provide an extremely low thermal resistance from junction to case. The thermal performance of the 6-, 9-, and 14-A SWIFT d - Using Low Voltage SWIFT DC/DC Converters with Ceramic CapacitorsPDF, 490 Kb, File published: Jan 8, 2003
This application note investigates an adequate phase margin for stable operation of SWIFTв„ў regulators with the ceramic capacitors at worst-case tolerances of regulator and external parts. TI also shows how the bandwidth and gain of feedback loop impact on load-current transient-response characteristics. Measurements and analysis have shown that the voltage-mode control SWIFTв„ў regulat
Model Line
Series: TPS54010 (4)
- TPS54010PWP TPS54010PWPG4 TPS54010PWPR TPS54010PWPRG4
Manufacturer's Classification
- Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Step-Down (Buck) > Buck Converter (Integrated Switch)