Datasheet Texas Instruments SN74LVCH16244AZRDR
| Manufacturer | Texas Instruments |
| Series | SN74LVCH16244A |
| Part Number | SN74LVCH16244AZRDR |
16-Bit Buffer/Driver With 3-State Outputs 54-BGA MICROSTAR JUNIOR -40 to 85
Datasheets
SN74LVCH16244A 16-Bit Buffer/Driver With 3-State Outputs datasheet
PDF, 866 Kb, Revision: B, File published: Nov 7, 2013
Extract from the document
Prices
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No |
Packaging
| Pin | 54 |
| Package Type | ZRD |
| Industry STD Term | BGA MICROSTAR JUNIOR |
| JEDEC Code | R-PBGA-N |
| Package QTY | 1000 |
| Carrier | LARGE T&R |
| Device Marking | LDH244A |
| Width (mm) | 5.5 |
| Length (mm) | 8 |
| Thickness (mm) | .8 |
| Pitch (mm) | .8 |
| Max Height (mm) | 1.2 |
| Mechanical Data | Download |
Parametrics
| Bits | 16 |
| F @ Nom Voltage(Max) | 100 Mhz |
| ICC @ Nom Voltage(Max) | 0.02 mA |
| Operating Temperature Range | -40 to 125,-40 to 85 C |
| Output Drive (IOL/IOH)(Max) | -24/24 mA |
| Package Group | BGA MICROSTAR JUNIOR |
| Package Size: mm2:W x L | 54BGA MICROSTAR JUNIOR: 44 mm2: 5.5 x 8(BGA MICROSTAR JUNIOR) PKG |
| Rating | Catalog |
| Schmitt Trigger | No |
| Technology Family | LVC |
| VCC(Max) | 3.6 V |
| VCC(Min) | 1.65 V |
| Voltage(Nom) | 1.8,2.5,2.7,3.3 V |
| tpd @ Nom Voltage(Max) | 6.6,3.9,4.7,4.1 ns |
Eco Plan
| RoHS | Compliant |
Application Notes
- Simultaneous-Switching Performance of TI Logic Devices (Rev. B)PDF, 378 Kb, Revision: B, File published: Feb 23, 2005
Simultaneous-switching noise can generate and propagate glitches in electronic systems. Therefore, system designers are faced with challenges to minimize simultaneous-switching noise, while increasing switching speed and improving signal quality. This report presents the performance of different TI logic devices under various simultaneous-switching conditions. Factors such as the number of bits sw - Bus-Hold CircuitPDF, 418 Kb, File published: Feb 5, 2001
When designing systems that include CMOS devices, designers must pay special attention to the operating condition in which all of the bus drivers are in an inactive, high-impedance condition (3-state). Unless special measures are taken, this condition can lead to undefined levels and, thus, to a significant increase in the device?s power dissipation. In extreme cases, this leads to oscillation of
Model Line
Series: SN74LVCH16244A (9)
Manufacturer's Classification
- Semiconductors > Logic > Buffer/Driver/Transceiver > Non-Inverting Buffer/Driver
