Datasheet Texas Instruments LMR14020SSQDDARQ1
| Manufacturer | Texas Instruments |
| Series | LMR14020-Q1 |
| Part Number | LMR14020SSQDDARQ1 |
Automotive 40V, 2A SIMPLE SWITCHER®, 2.2MHz Step-Down Regulator with 40uA IQ 8-SO PowerPAD -40 to 125
Datasheets
LMR14020-Q1 SIMPLE SWITCHERВ® 40 V, 2 A Step-Down Converter with 40 µA IQ datasheet
PDF, 1.5 Mb, Revision: A, File published: Feb 3, 2016
Extract from the document
Prices
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
Packaging
| Pin | 8 |
| Package Type | DDA |
| Industry STD Term | HSOIC |
| JEDEC Code | R-PDSO-G |
| Package QTY | 2500 |
| Carrier | LARGE T&R |
| Device Marking | 1402SQ |
| Width (mm) | 3.9 |
| Length (mm) | 4.89 |
| Thickness (mm) | 1.48 |
| Pitch (mm) | 1.27 |
| Max Height (mm) | 1.7 |
| Mechanical Data | Download |
Parametrics
| Control Mode | Current Mode |
| Duty Cycle(Max) | 98 % |
| Iout(Max) | 2 A |
| Iq(Typ) | 0.04 mA |
| Operating Temperature Range | -40 to 125 C |
| Package Group | SO PowerPAD |
| Rating | Automotive |
| Regulated Outputs | 1 |
| Special Features | Enable,Frequency Synchronization,Light Load Efficiency,Power Good,Pre-Bias Start-Up,Spread Spectrum,Tracking,UVLO Adjustable |
| Switching Frequency(Max) | 2500 kHz |
| Switching Frequency(Min) | 200 kHz |
| Type | Converter |
| Vin(Max) | 40 V |
| Vin(Min) | 4 V |
| Vout(Max) | 30 V |
| Vout(Min) | 1 V |
Eco Plan
| RoHS | Compliant |
Design Kits & Evaluation Modules
- Evaluation Modules & Boards: LMR14020QDPREVM
LMR14020QDPR Wide Vin Step-Down Converter Evaluation Module
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: LMR14020SEVM
LMR14020S Step-Down Converter Evaluation Module
Lifecycle Status: Active (Recommended for new designs)
Application Notes
- How to Evaluate the Maximum Inductor in Internal Compensation PCM Buck ConverterPDF, 2.3 Mb, File published: Sep 20, 2017
With simple frequency compensation, Peak Current Mode (PCM) control is commonly used in integratedcircuits (IC) to improve the line and load transient performance. Slope compensation is implemented toprevent sub-harmonic oscillations at a duty cycle greater than 50%. Usually the inductor is considered asa current source in a simplified PCM buck converter model, which actually has a significa
Model Line
Series: LMR14020-Q1 (8)
Manufacturer's Classification
- Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Step-Down (Buck) > Buck Converter (Integrated Switch)
